Municipal Administration And Water Supply Department Tender

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev V Specifications

Providing and laying tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5

Providing and laying Bituminous Concrete to 30mm thick using 0.13 cum of 19.00 - 9.50mm graded metal, 0.17cum of 9.50 -2.36mm graded metal and 0.26cum of 2.36 and below metal by adding theshredded plastic 10% of bitumen quantity 5.03kg (50.030 X 10%=5.03Kg) shredded plastic waste over the aggregate heated to 170 degree celcious in the central hot mix plant, mixed well with 45.27kgs of hot bitumen VG30 bitumen 160 degree celcious 60/70 grade for premixing per 10sqm to lay 30mm compacted thick of bituminious concrete including the cost of materials and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix in the required temperature for to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 80-100 KN Vibratory / Pneumatic Roller to the required density etc., including labour for loading bitumen in to bitumen tank and metal to feeder unit including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5.

Earthwork excavating and depositing on bank with initial lead of 10 metres and lift of 2 metres in all kinds of soil except medium rock, dense medium rock and hard rock requiring blasting including refilling the sides of foundation with excavated earth in layers of 15 cm thick, watering and consolidation and depositing the surplus earth with in the compound in places as shown by the departmental officers with initial lead and lift, cleaning, leveling the site etc., complete complying with standard specifications

Laying Plain cement concrete 1:4:8 ( One cement four sand and eight aggregate ) using 20 mm ISS Hard Broken granite stone jelly for foundation and basement including watering if found necessary and laid in layers of 15 cm thick, and consolidated including curing, cost and conveyance of all metarials to work site, all labour and incidental charges etc., complete complying with standard specifications

Providing steel centering for sides and soffits including supports and strutting upto 1:10/1:20 up to 3.29m height for plain surfaces such as RCC slabs, rectangular beams, Tee beams, bed blocks, culvert body walls, deck slabs, retaining walls, staircase, Landing slab, landing beams, canopy etc., with all cross bracings using mild steel sheets of size 90 mm X 60 mm X 10 gauge stiffened into welded mild steel angles of size 25 mm X 6 mm for boarding laid over silver oak ( country wood ) joists of size 10 cm X 6.5 cm spaced at 90 cm centre to centre and supported by casurina props of 10 cm to 13 cm dia spaced at 15 cm c/c including cost of nails, ropes, all labour charges and incidental charges etc., complete complying with standard specification. (TNBP Spl No:154 A)

Plain cement concrete 1:2:4 ( one cement, two sand, and four coarse aggregate ) using 20 mm ISS hard broken granite stone jelly for all plain cement concrete works excluding cost of shuttering, and centering including all labour charges and incidental charges for cost and conveyance of all materials to work site, mixing and laying concrete, finishing the surface nearly rough, compacting using vibrators, curing etc., complete complying with standard specification

Plastering with cement mortar (1:4) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

Supplying, fabricating and placing in position of mild steel (or) Ribbed tor steel rods of required size for reinforcement of all RCC work including cost of steel rods, binding wire and labour charges and incidental charges for cutting & bending rods, tieing into grills, placing in position etc., complete as directed by the departmental officers. (TNBP No:15886)

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Providing and errecting direction and place identification retro- reflectorised sigh as per IRC : 67-2010 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.50mm thick fixed on back supporting frame and supported on a mild steel single angle iron post 75X75X6mm firmly fixed to the ground by means of properly designed formation with M15 grade cement on size 45X45X60cm, 60cm below ground level as per approved drawing.

Road marking with Hot applied Thermoplastic compound with Reflectorising Glass Beads on Bituminous surface. Providing and laying of Hot applied Thermoplastic compound 2.50mm thick including Reflectorising Glass Beads at 250gms per Sqm area, thickness of 2.50mm exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level, uniform and free from streaks and holes.

Providing and fixing reflective road studs of 'Category A' Raised pavement markers made out of poly carbonate/methylate/ABS moulded body confirming to ASTM D 788 and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D 4280. The reflective raised pavement markers shall also confirm to the MORTH circular No.RW/NH. 33023/10/97-DO.III dt.11.06.1997. The height, width and length shall not be less than 15mm, 90mm and 100mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35+/-5 degree. Each reflector shall have a CIL not less than values specified in Tablw 2 of said MORTH circular. The strength of detachment of the integrated cylindrical shanks. (of diameter not lesthan 19+/-2mm and height not less tha 30+/-2mm) from the body is to be minimum value of 500 kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer. The marker shall support a load of 13635 kg tested in accordance with ASTM D 4280 and confirming to IRC 35-2015 guideliness and MORTH & H specification 804 etc., completed.