Municipal Administration And Water Supply Department Tender

Supplying, erecting mild steel with shuttering using MS sheets stiffened with MS angles, laid over country wood joists and side supported with casurina props for plain cement concrete wall works as directed by the departmental officer etc., complete.30(S) 86 86 A V, VI (S3) VII as per MORTH specifications.

Cement concrete 1:2:4(One cement and two sand and four aggregate) using 20mm machine chips including cost of centering (for sides and supports), Expansion joint using bitumen pad and other materials and labour charges etc., complete as per std. specification.30 V, VI (S5) VII & 13 as per MORTH specifications.

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Supplying, fabricating and placing in position of steel rods including cost, conveyance, bending rods and tying grills with binding wire etc., complete.SS 86 & 86 A V, VI (S3) (S6) VII as per MORTH specifications.

add GST 18%