Municipal Administration And Water Supply Department Tender

Plain cement concrete 1:5:10 mix using 40mm ISS gauge HBBG metal etc., complete. as per standard specification.(Using with M sand)

Plain cement concrete 1:2:4 mix using 20mm ISS gauge HBBG metal etc., complete. as per standard specification.(Using with M sand)

Providing Steel Centering and shuttering without strutting sites and soffits arrangements etc., complete. As per standard specification.

Supply cutting Bending tying and fixing in position of MS (or) RTS grills for RCC work including cost of steel and binding wire etc.,

Reinforced Cement Concrete 1:2:4 (one cement, two sand and four graded stone aggregates) mix using 20mm ISS gauge HBBG metal excluding cost of reinforcement, centering and shuttering but including laying concrete curing, finishing etc., cost of all materials and labour charges etc., complete as per standard specification. (Using with M sand)

Supply, Erection of 8m free standing Dragon pole with Single Arm Bracket made of circular mild steel pipe of two secon (grade YST 210) Boom section 139.7mm Dia x 3.6mm thick with 2000mm Height & Top section 114.3mm Dia x 3.2mm thick with 3994mm Height. Bracket stem made of MS pipe 76.1mm Dia x 2.6mm thick, emerging from a forged ring upto a length of 1490mm sealed at top with MS pipe 38.1mm Dia x 397mm with 80 Dia sphere. The angularly projecing Single arm made of MS pipe 60.3mm Dia x 2.6mm thick extending from stem, spruced up with MS decorave sheet between the stem and arm and facilitates the fitment of street light luminaire at 1100mm on either side from the vercal axis of the bracket stem. Wind speed considered in design 50 m/sec in compliance with IS 875 Part 3 : 1987.Pole section welded by certified welders using high end MIG welding processes.PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the boom of the door and safety rope with IP protecon rang.The control gear tray is prewired with 2.5 Sq.mm cable,6A 1 No. MCB and 32A terminal connectors for loop-in / loop-out arrangement. Any other internal cables and connecons shall not be covered in the scope of supply. Mild steel mounting plate 300mm Square x 16mm thick Steel of grade E250 to IS 2062 : 2011 with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC215. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouing into the specially designed foundation. All dimension are within +/- 5% tolerance.Inhouse shot blasing pole. The pole is coated with pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coang thickness 60-80 microns). The Pole shall be provided with Trafic White / Golden yellow / Black as standard colour etc, complete., excluding GST etc. complete.

Supply and laying of 3 core 1.5sqmm power cable including labour charges complete as per standard specification

Supply and Laying of 50mm HDPE Pipe: PN - 6 Supply and Laying of 50mm dia HDPE pipe on ground with necessary clamping arrangements etc complete.As directed by the departmental officers.IS 4984/1995

Supply and laying of. U.G. cable: Supply and laying of 4 core x 16 sqmm PVC armoured (Aluminium) L.T.U.G. cable in a trench to be excavated at a depth of 0.75m and refilling the trench with excavated earth to make good. as per standard specification.

Supply and clamping of. U.G. cable: Supply and laying of 4 core x 16 sq.mm PVC armoured (Aluminium) LT UG cable on wall or post with necessary clamping with necessary arrangements etc complete.

Supply and fixing of decorative/ heritage suspended luminaire with a system lumen not less than 18000 lumens with system wattage not more than 150W. The luminaire efficacy should be greater than 120 lm/ W. The luminaire shall be with operating voltage 140-270V with PF 0.95 and THD 10%. The LED shall be of SMD type only with CCT 3045K +/- 355K and CRI shall be greater than 70. The luminaries shall be with IP 65, IK 05, and it should have 10KV External Surge Protection. Built in surge protection 4KV. The luminaire shall comply to IS 10322, IEC 60598. The Luminaries working temperature shall be 10◦ to + 50◦C. The housing shall be Spun Aluminium Powder coated housing with PDC heat sink. The fixture lens should be precision engineered individual lens made of optical grade poly carbonate for maximum intensity and the cover shall be PC diffuser to Protect the optics. The fixture dimension shall be less than 564mm dia. Height shall be more than 702mm and weight not less than 7kg. The Maintenance of lumen output shall be 50000 hours at L70. The Connstant current electronic driver provided with high voltage, open & short circuit protection. Suitable for Dia. 39mm ID of pole bracket.etc, complete as directed by the departmental officer.

Supply and providing of cable termination: Supply and providing of cable termination of 4 core x 16 sqmm PVC LT UG (Aluminium) armoured cable with necessary aluminium socket by crimping with electrical connection etc. complete.