Municipal Administration And Water Supply Department Tender

Earth work Excavation in all classes of soils except hard rock not requiring blasting and depositing on bank with all leads and lifts including cost of all labour, materials, tools, equipments and all other incidental charges such as bailing out water, shoring, strutting, walling and forming protective bunds wherever necessary etc and sheeting, shoring, bracing and their subsequent removal, removal of all logs, stumps and other deleterious matter and obstructions, trimming of bottom of excavtion backfilling, and clearing the site and disposal of all surplus materials etc. complete as per standard specification for Foundation under Abutments and Piers for foundation.

Supplying and filling up the empty cement gunny bags with sand,stiching them,conveying the same to site and stacking as directed within 10m lead including cost of sand,jute,thread,needle & labour charges as per specification.

Plain cement concrete 1:3:6 mix (One cement four M.Sand and eight aggregate) using 40mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing cost,bailing out water and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plain cement concrete 1:2:4 mix 20mm metal(One cement four M.Sand and eight aggregate) using 20mm size ISS gauge HBBG metal including mixing, laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Providing and fixing 25mm dia 3m long cold twisted deformed steel dowel bars with ine end driven into 40mm dia 1.0 meter deep hole drilled in bed rock and other end provided with L-bend for embedding in concrete/ masonary/ over flow/ non-over flow blocks/ and other appurtenant works including cost of all materials, machinery, labour, drilling and cleaning hole, filling hole with thick cement slurry driving anchor rod etc,. complete

Supply and filling soling using 150mm size ISS gauge HBBG metal including laying, consolidating, curing, cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Vibrated Reinforced Cement Concrete of grade M25 (Design mix) using 20mm and below HBG graded metal including cost and conveyance of all materials to site excluding cost of steel including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete, working at all depths hire charges for Tools and Plants and incidental charges such as bailing out water, maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevent standard specification for Footing under Abutments

Vibrated Reinforced Cement Concrete of grade M25 (Design mix) using 20mm and below HBG graded metal including cost and conveyance of all materials to site excluding cost of steel including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete, working at all depths hire charges for Tools and Plants and incidental charges such as bailing out water, maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevent standard specification for ABUTMENT (Below sill).

Vibrated Reinforced Cement Concrete of grade M25 (Design mix) using 20mm and below HBG graded metal including cost and conveyance of all materials to site excluding cost of steel including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete, working at all depths hire charges for tools and Plants and incidental charges such as bailing out water, maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevent standard specification for ABUTMENT (above sill).

Vibrated Reinforced cement concrete of grade M25 (Design mix) over deck sheet using 20mm and below HBG metal including cost and conveyance of all materials to site excluding cost of steel but including cost of form work, labour charges for mixing, transporting, laying and curing concrete at all height, hire charges for Tools & Plants including all other incidental charges etc., complete for Deck slab

Vibrated Reinforced cement concrete of grade M25 (Design mix) using 20mm and below HBG metal including cost and conveyance of all materials to site excluding cost of steel but including cost of form work, labour charges for mixing, transporting, laying and curing concrete, working at all heights, hire charges for tools and plants including all other incidental charges etc., complete for Crash Barrier

Vibrated cement concrete M25 Grade (Design mix) using 25mm, 12mm and 6mm IRC size hard broken granite metal including cost and conveyance of all materials to site cost of premoulded expansion joints and fixing the same in position including cost and labour charges for formwork, labour charges for laying, compacting, curing including all other incidental charges etc.,complete for wearin coat 75mm uniform thickness over deck slab and over approach slab

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works in all heights as per the design given including cost of steel and binding wire, conveyance, labours, machinery to site etc complete.

External wall surface Painting two coats with ready mixed Exterior Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt etc. complete and including necessary plaster of paris, putty, wherever required etc. complete as per standard specification.

Filling behind Abutments and return walls with clean gritty free draining gravel including cost of gravel having PI value less than 6, conveyance of gravel to work site upto lead 20km. Laying, handling charges and filling in layers tamping under optimum moiture content to get the maximum density, including watering, with all leads and lifts for water and all other incidental charges etc., complete

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification.

Paving the floor with best approved quality fine Polished Rajesthan kotta stone slab of size 20mm with machine cut edges of size above 2'0" x 2'0" laid over a cement mortar 1:3 mix, fixing the slab in true tight angles with minimum possible width of joints and polishing the joints with cement mortar 1:3 mix and polishing with floor polisher to a high degree to finish and curing etc. complete as directed by depat. officers.

Supply and fixing of Pre-fabricated Structural Steel DECKING SHEET having minimum 345 Mpa yield Strength, colour coated Galvanised Structural Steel DECKING SHEET Zinc coating as per IS:277 of equivalent Standard. The structural decking panel shall have 955/m² effective width (Overall Width of 931mm), nominal crest height 50 mm deeper shall have 2301mm centre to centre pitch with the thickness of 1.25 mm BMT for fixing us side of ribs for required length as per Concrete thickness at embossment (share grove) on top & side of ribs for better composite action and shall have the site (165mm Avg) with self drilled screws and EPDM wafers

Supplying, fabricating, erecting structural steel work for bridge deck slab riveted, bolted or welded in built up sections, trusses and framed work, including including conveyance all material and cutting, hoisting, fixing in position and applying a priming coat of approved steel primer as per design given by the departmental officers etc, complete as per standard specification

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc. complete in all floors.

Supplying and fixing 300mm wide PVC EXPANSION JOINT in the 20mm expansion gap provided in betweendecks over piers and in between deck and dirt wall over abutment as shown in the drawing including cost and conveyance of expansion joints including shalimar pad and joint sealant etc., complete

Supplying and fixing GI DRAINAGE SPOUTS 100mm dia as per GOI drawing SD/205 with grating arrangements at top as shown in the drawing and 100mm dia drainage spout projecting atleast 300mm beyond the bottom of deck slab as shown in the drawing, including cost and conveyance of Galvanised iron pipes and flats and fixing them in position, etc., complete as per cl 2705 of MORT&H specification. (V Revision)

Supplying and fixing KRAFT PAPER for full width of seating of deck slab and including cost and conveyance to worksite, labour for fixing the same in correct position and all other incidental charges etc., complete.

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion

SUPPLY OF ARCHITECTURAL SINGLE ARM POLE Supply and fixing 8M height Single arm Conical Pole ( class B) made of GI with top 76.10mm dia. and bottom 114.30mm dia. & 2M Height 32mm dia GI pipe (Class B) Altair Design bracket complete with suitable MS clamp. The pole to be provided with a 300x300x6mm steel base plate. This mounting steel base plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. Entire pole & bracket shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole is hot dip galvanized (60 microns Minimum) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole strength. Also supply and fixing of 120W LED street light fitting with LED (Higher end),SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth

Supply and laying of 4 x 10 sq.mm PVC LTUG aluminium armoured cable on post or on wall with MS clamps including conveyance etc.,

Supply and providing cable end termination of 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete