Municipal Administration And Water Supply Department Tender

Supplying and fixing of floor carpet of thickness 4mm to 6mm, complete complying with standard specification and as directed by the departmental offiicers . So as to have an neat apperance as directed by the departmental officers.

Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.

In Thired floor

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Counductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories in flush with wall with 1 Moudule white cover plate with frame (Plastic) with 1 module flush mounting box (GI) and 6A 1way SP 1module switch (Higher End Crabtree/Legrand/Hager make) and making good of the suitable colour for PVC open light/fan Point (For electronic regulator) (5 Points Per Coil) (DATA-1) (For ENT Sound Proof Ward)

Supply and fixing of 12W LED Spot Fitting (Higher End Philips / Havells /Equivalent )complete on ceiling with PVC unsheathed leads from terminals to the fitting. (DATA-2) For ENT Sound Proof Ward )

Supply and fixing of 24W LED 4000K 2x2 Square type recessed false ceiling fitting (Higher End Philips / Havells / Equivalent ) complete on ceilling with PVC unsheathed leads from terminals to the fitting.(DATA-3) (For END Sound proof ward)

Supply and fixing of 4Nos. 6A 5 pin universal socket 2 module, 1 No 16A 5 pin universal socket 2 module 6A 1way SP 1 module switch and 16A 1way SP 1module switch concealed in suitable 18 module metal flush type box (GI) coverd with 18 module white cover plate with frame (Plastic) (Higher End Crabtree/ Legrand / Hager make) in flush with wall with earth connection .(DATA-4) (For ENT Sound Proof Ward)

Supply and fixing of 6A/16A combined socked 2 module with concealed in suitable 3 module flush mounting box (GI) in flush with wall and 3 module white cover plate with frame (Plastic) (Higher End Crabtree/legrand/hanger make) with Painting. (DATA-5) [For AC unit] (For ENT Sound Proof Ward)

Supply and fixing of 20A DP 1W Switch 2 module with concealed in suitable 3 module flush mounting box (GI) IN flush with wall and 3 module white cover plate with frame (Plastic) (Higher End Crabtree/ Legrand/ Hager make) with painting. (DATA-6) [For AC unit] (For END Sound Proof Ward)

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V gradein suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour [SD-56]

Supply erection testing commissioning of 1.50TR (4500 Kcal/Hr ) ABS plastic split type Air Conditioner Confirming to IS1391[Part 2] 1992 with Rotary compressor operating on refrigerant R22/Non CFL suitable for wall mounting for operating on 230V 50HZ single phase AC supply with Three Star rating Model as per BEE Specification and capable of performing the following functions. A)Cooling, B) dehumidifying C) Air circulating D)Filtering the installation work for the above split 1.Mounting /fitting indoor and outdoor units at their respective location. 2. Laying refrigerant pipe line of 6mtrs distance and connecting the both units after drilling hole in the wall if required thickness of the copper tubing shall not be less than 0.80mm. 3. Insulating the suction pipe with expanded polythene foam 5mm thick tubing. 4. Laying 15mm dia flexible PVC drain pipe of 6mts length to throw out the condensate water being formed in the indoor unit 5. Leak testing the entire gas unit.6.Charging refrigerant gas in the unit. 7. Suitable electric wiring to be orovided with 2.5sq.mm PVC insulated copper wire between indoor and outdoor units up to 4mtrs length and up to switch within 3mtrs of location of indoor unit.(Make - Carrier/voltas/Blue star make only) [SR] (For ENT Sound Proof Ward)

Supply and fixing of 4KVA Automatic voltage stabilizer of wall mounting type with Automatic time delay switching arrangements suitable to operate on 230V Single phase supply.

Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3Mtrs supplied with AC Unit) (SR)

Supply and fixing of MS Stand for fixing outdoor units.[SR]

Supply and fixing of water drain line (1" PVC Pipe) (For Split AC Unit ) [SR]