Municipal Administration And Water Supply Department Tender

Plastering in Cement Mortar 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

Plastering in Cement Mortar 1:4 Mix (one cement, four sand) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Supply and delivery of following GI Specials with ISI mark including cost and conveyance of all materials etc., completed.20mm G.I Hex Nipple

40mm dia G.I Hex Nipple

40mm Dia G.M gate valve with ISI mark

Supply and fixing in positon 15mm dia brass/c.p screw dome tap /pillar /Swan neck tap "(heavy duty) of approved make conforing to I.S Specification and quality including cost and conveyance etc complete

Supply and delivery of following PVC 6 KSc pipes with ISI mark including transporting the same to the site directed by the departmental officers etc complete as standard specifications 25mm dia PVC Pipe (10KSC)

40mm dia PVC Pipe (10KSC)

110mm dia PVC Pipe

32mm UPVC pipe

Supply and delivery of following PVC 6 KSc Specials with ISI mark including transporting the same to the site directed by the departmental officers etc complete as standard specifications 25mm PVC Equal Tee fabricated 6KSC

40mm dia PVC Tee

25mm PVC Elbow

40mm dia PVC Elbow

110mm dia PVC Elbow

25mm PVC coupling

40mm Dia PVC Coupling

Supply and delivery and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including, cutting, threading and fixing charges tec., as Specification. 1000Litre HDPE Tank

Supplying and fixing over the floors best quality of Design ceramic tiles of 30.5 c.m x 30.5c.m x 6mm size of approved colour laying with cement mortor 1:2 mix pointing the joints with colour pigments etc. Complete.

Supplying and fixing in Position of Indian Oriya type colour water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

Supplying and fixing RCC Pre cast slab in RCC 1:1½:3 mix including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supply and fixing of 18W 4 Feet LED Light Fitting complete with copper choke and condensor with TW round block on wall or ceilling with flu tube with PVC unsheathed Copper leads from terminal to the fitting etc.

Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and thick TW switch box and 5A F.T.switch with painting of suitable colour for open PVC light point.

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

32mm Pipe