Municipal Administration And Water Supply Department Tender

Providing and laying Tack Coat over 2.50 kgs/10 sqm over the WMM surface treated with binder using 2.5kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder including labour charges for applying the required quqntity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications.

Providing and laying tack coat of 2 kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and Laying 50mm consolidated thick Dense Bituminous Macadam using 0.24 cum of 26.5-13.2mm, graded metal and 0.25 cum of 13.20-2.36mm graded metal and 0.23 cum of 2.36mm & below and with 53.20 Kgs of 60/70 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20 – 30 ton capacity, Conveying the mix by tipper trucks to paver site, spreading the mix in require dtemperature for uniform thickness of 50mm with mechanical paver to the specified grades and crosssections and compaction by Vibratory roller to there quired density etc., including labourcharges for loading bitumenin to bitumen tank and metalt ofe ederunit ,labour forattending to paversite etc.,including hire charges and fuel charges for 20-30t CMP with bitumen boiler,tippertrucks, paverfinisher, vibratory roller sand all other tools and plants required, including all otherincidental charges etc.,complete using CMP clause 505of MORTH Rev-5 specifications.

Providing and laying Bituminous Concrete to 30mm/40mm thick using 0.13 cum of 19.00 - 9.50mm, 0.17cum of 9.50 -2.36mm and 0.26cum of 2.36 and below with 50.30kgs of VG30 / VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5.

Add GST 18%