Municipal Administration And Water Supply Department Tender

Depth 3 - 4.00m

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one cement, Four fine aggregates and Eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Plain Cement Concrete 1:2:4 [one cement, two Sand and four course aggregates] using 20mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc complete complying with standard specification and as directed by the departmental officers.

Providing and laying in position machine batched and machine mixed design mix M-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) as per instruction of architectural design and drawings. (Reinforcement item for all precast items) (Contractor has to make his own arrangements for the supply of steel and binding wire)including cost of cutting, fabricating and placing etc. (Using Fe 500 steel).

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam stair case etc., in all floors using mild steel sheets of 90cm x 60 cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc complete complying with standard specification and as directed by the departmental officers.

Raft Concrete

Wall Concrete

Cover slab Concrete

Refilling the trench icluding cost of all charges etc completed.

Brick work in CM 1:5 (one cement & five sand) using III class ground moulded bricks of size 8 3/4"X4 1/4" X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with cement mortar 1:3,10 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supply,Erection,Fabrication and Commissioning of machines in Collection cum equalization tank Airblower = 2 nos 200m3/H, Air blower = 2 nos 850m3/H ,Blower motor= 2 No's of 7.5HP ,Blower motor= 2 No's of 22 HP ,Clarifier Motor = 1 nos of 1Hp,Rotary screen Motor = 1 nos of 1Hp , Tranfer Pump = 2 nos of 7.5Hp Kirloskar, Recycle Pump = 2 nos of 3Hp Kirloskar, Acoustic Damper 1 = 2 set , Acoustic Damper2 = 2 set , Driver gear and Chain assembly= 1 set ,Snab Diffuser= 20 lot of Proflex make, Disk Diffuser= 210 lot of Proflex make, Media= 9 lot's, Curved Sreeen with SS ,Rotary Screen Assembly with screen , Pressure Gauge = 4Set Pvc,Upvc,GI , Ms pipes and acceseries,Flange,Valves, Bolts and Nuts, "I" Beam ,Angle and Chequered Plate of 2mm tk,Electrical acceseries,etc

GST add 18 %