Municipal Administration And Water Supply Department Tender

Providing and errecting centering for sides and soffits of reinforced cement concrete slabs or plane surfaces including strutting upto 3m height using MS Sheets of size 0.9Mx0.6M of 10 kg. stiffened with MS angle of size 25mmx25mmx3mm laid over silver oak

Footing

Column box

Lintel and Roof slab

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Below Gl

Ground floor

First Floor

Supplying fabricating and placing in position of MS/RTS rods including cutting, bending into shape, tying and placing the grill in position including cost of binding wire including cost and conveyance of all materials and labour etc., complete

Brickwork in Cement Mortor 1:5 (One cement five sand) mix using country burnt of standard size 8 3/4"x4 1/4"x2 1/4" including cost and conveyance of all materials and labour etc complete as per standard specifications (Sub structure)

Supplying and filling Gravel watering Ramming including cost and conveyance of all materials and labour etc., complete as per standard specifications.

Brickwork in Cement Mortor 1:5 (One cement five sand) mix using country burnt of standard size 8 3/4"x4 1/4"x2 1/4" including cost and conveyance of all materials and labour etc complete as per standard specifications

Ground floor

First floor

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

White washing two coats using best shell lime including cost and conveyance of all materials and labour etc., complete as per standard specifications.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification

Paving the flooring with kotta stone slab of size 610x610x 20mm in all floors laid in of cement mortor 1:3 (one cement three sand), 20 mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc. so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. complete.

Supplying and fixing M.S. Grills to doors and windows and ventilators using M.S. flat of size 20x6 mm for outer member 12x 6mm for inner member which should be fixed to frames as directed by the departmental officers including cost of providing one coat of best quality red - oxide primer etc., Complete (The designs of M.S. grills should be got approved from departmental officers before their use in execution)

Supply and fixing of Stainless steel (Salem stainless steel) Door frame ( Box section using stainless steel plate of 1.6mm thick) of size 100mm X 60mm with a rebate of 30 / 35mm X 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel holdfast etc.

Supplying & fixing door shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,single leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900 mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Providing and fixing in position best approved quality PVC Rain water down fall pipe (4 Kg. /cm2 pressure ) of following diametres including cost of PVC pipes with necessary shoes, bends, clamps including cost of all materials, brass screws, nails, teakwood plugs and fixing of cast iron gratings at junction of parapet wall and the R.C.C. roof slab include finishing neatly etc. complete including cost of all materials, brass screws, nails, teakwood of removable iron gratings of appropriate size. The size of teakwood plugs to be used shall be 150 mm x 25 mm infront and 200 mm x 75 mm in all other sides with a depth of 10 cm. The PVC pipe shall be fixed with teakwood plugs by means of "U" clamps at the centre of the pipe line shall be fixed in addition to these for more than 3 Metres pipe length complying with standard specifications.

Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using12mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Painting two coat over New iron work using synthetic enamel paint of approved quality and colour including cost and conveyance of all materials and labour etc., complete as per standard specifications

Wiring with 2 x 1.5 sqmm PVC unsheathed SC alu. Cable of 1100 V Grade in suitable PVC rigid pipe in wall and ceiling with PVC accessaries and T.W. Switch box with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC Light point.S.D 21

Wiring with 2 x12.5 sqmm PVC unsheathed SC alu. Cable of 650 V Grade in suitable PVC rigid pipe in wall and ceiling with PVC accessaries with suitable Teak wood box to house the control switch and regulator with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC Plug point etc., complete as per standard specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock to required size as directed by the departmentalofficers of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supply and fixing of 4 way single phase DB of 16A / way with 16A, DP switch of 500V with metal clad (side handle) with fuse and neutral on suitable TW board with PWD earthing

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting

Supplying and fixing PVC door using 19 Gauge 19mm MS square tubes for styles and outer frames, 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter including slidng arrangements.

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)White glazed European Water Closet with 10 litre capacity PVC flushing tank fixed on to wall

Supplying, laying and jointing UPVC pipes of approved quality and best variety of Standard Dia Ratio - 11 pipes of the following dia including labour for fixing UPVC Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete. etc., complete complying with standard specification. The UPVC pipes shall be got approved by the Executive Engineer before use on work. External Water Supply -BGL 3200 UPVC pipe -Below ground

Supplying, laying and jointing UPVC pipes of approved quality and best variety of Standard Dia Ratio - 11 pipes of the following dia including labour for fixing UPVC Specials (excluding charges for cutting and threading and cost of such specials) with necessary shellac, thread ball, etc., and making holes on the wall / concrete and making good the dismantled portion to the original condition with necessary brick work / concrete. etc., complete complying with standard specification. The UPVC pipes shall be got approved by the Executive Engineer before use on work. (External Water Supply-AGL) 25mm Upvc Pipes.

Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements

32 mm dia Upvc. Elbow

25 mm dia Upvc. Elbow

32 mm dia Upvc. Tee

25 mm dia Upvc. Tee

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. 25mm G.M Wheel valve