Municipal Administration And Water Supply Department Tender

Supplying and laying Rubberised interlocking Paver block M40 grade 80mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Plain Cement Concrete 1:4:8 (one cement four fineaggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Suppling and erecting shuttering with necessay supports for Plinth Beam with all cross bracings etc., complete ( Side Only) the payment for centering shall be given offer the concrete is laid vertical portion using steel plate..

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Supply of 12.5 Mtr High mast system with all accessories mast shaft fully hot dip galvanized and should with stand wind velocity of 160 km/hr without gear box and power tool

Supply and delivery of 200W LED (Flood light Type) Lamp Fittings made of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP65. Separate compartment for LEDs & electronic driver with CCT of 5700K, PF 0.9. System efficacy 85, Operating Volage Range120 -270 ~ Rated Power 200W Current (A) @240V 0.880, Wattage (W) @ 240V - 200W , Power Factor 0.9 Current Harmonics (THD) 10% Operating Conditions Operating Frequency 50Hz Operating Temperature Range -20°C to +50°C Colour Temperature Cool White (5700+_300K) Luminous Flux 22000 Lumens package not less 100 - 110 lm/W Life Span 50,000 Hours Approx,waight in (KG) 12.65kg :. Body Alluminium Die casting Body Heat Sink Optimized thermal design to ensure maximum life.Protection of IP 65 Standards for Dust and Water including interconnection etc; complete as per Standard Specification.as directed by the departmental officer.

Design and casting of Suitable foundation with foundation bolt RCC cement concrete including Steel cement centering jelly and stand including earth work excavation and refilling

Supply and laying of 2x16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD -199) (Electrical dt-23-24)

Erection and commissioning of 12.5 mtrs High mast on the above said concrete foundation using suitable equipments

Fixing of 200w LED flood light luminaries in the lantern carriage including internal wiring using flexible copper cable complete.

Earthing as per PWD standard with an earth eletrode of 2 mtr Class B GI Pipe of dia not less than 32mm complete with necessary masonry work. (SD -234) (Electrical dt-23-24)

Supplying and fixing of Name board of cuddapah stone slab , rate shall including cuddapah slab and letter writing and materials charges etc, complete

Add GST 18%