Municipal Administration And Water Supply Department Tender

Providing and laying tack coat of 2.5kgs/10sqm over the WMM surface treated with binder using 2.5kgs of bituminous emulsion for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 specifications

Providing and laying Bituminous Concrete to 30 / 40 mm thick using 0.13 cum of 19.00-9.50mm graded metal 0.17 cum of 9.50-2.36mm gragede metal and 0.26 cum of 2.36mm & below metal by adding theshredded plastic 10% of bitumen quality 5.03kg (50.30 x 10%=5.10kg) shredded palstic waste over the aggregate heated to 170 degree celcious in the central hot mix plant, mixed well with 45.27 kgs of hot bitumen VG30 bitumen (160 degree celcious) 60/70 grade for premixing per 10sqm to lay 30mm compacted thick of bituminious concrete including th cost of materials and conveyance of all C M P site, heating the bitumen and aggregates to the required temperature and mixing the minimum required Temperature in central hot mix plant 20-30 tones capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 80-100KN vibratory Roller / Pneumatic roller to thererequired density etc., including labour for loading bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel chareges for 20-30 t C M P with bitumen boiler, tipper trucks, paver finisher / 9m paver finisher Vibratory/pneumatic rollers and all other tools and plants required, including all other incidental chareges etc., complete as per specification using C M P clause 507 on Morth REV -5 specifications. (Without Tack coat)

Add GST 18%