Municipal Administration And Water Supply Department Tender

Providing and laying Tack coat over WBM / WMM surface (treated with primer ) using 2.5kg of Emulsion Bitumen (RS1) per 10 m2 for preperatory to another Bituminous construction over it, including cost of material , labour charges, rental for machinery , fuel and all other incidental charges etc., complete as per clause 503 of MORTH Rev-5

Providing and laying tack coat of 2kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24 cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20 kgs of VG30 bitumen for premixing per 10 sqm including cost and conveyance of all materilas to CMP site , heating the bitumen and agregates to the required temperature and mixing them in required temparature in central hot mix plant 20-30 ton capacity , conveying the mix by tipper trucks to work site , spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sectons and compacted ty Vibratory / Pneumatic roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 CMP with bitumen boiler tipper trucks , Paver finisher , Vibratory / pneumatic rollers and all other tools and plant required , including fuel and all other tools and plant required , including fuel and other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5.

Providing and laying Bituminous Concrete to 30 mm thick with the proportion of mix for 40mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 45.27 kgs of VG30 bitumen and 5kgs of Plastic waste of for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix ty tipper trucks to paver site , spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne vibratory / Pneumatic roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 CMP with bitumen boiler, tipper trucks , Pavar finisher , Vibratory / Pneumatic roller and all other tools and plant required , including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5.

Supplying and filling the foundation and basement with Screen Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Providing and laying of hot applied thermoplactic compound 2.5mm thick including reflective glass besds @ 250gms per sqm area thickness of 2.5mm as per IRC 35. The finished surface to be level, uniform and free from streaks and holes all complete as per technical specifications and as directed by departmental officers.

Manufacturing, Supply and Fixing of Retro Reflective Road Name Sign Board Single Arrow of size 1.2X 0.6m made out of Wide Angle Cube Corner Micro prismatic grade sheeting conforming to IRC-67:2010 & Type XI Standards of ASTM D 4956-09 specifications and fixed over 2mm thick Aluminium sheet & back support frame of 25X25X3mm MS Angle. Frame supported by 38 OD Stainless Steel pipe Vertical post with wall thickness of 2mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cm X 30cm X 45 cm etc complete. The information message shall be made out of cut out letters in Blue color transparent overlay film as per IRC 67-2010 Guidelineds. 7 years Warranty for Retro Reflective Sheeting from the original sheeing manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product offered shall be submitted by the contractor.