Municipal Administration And Water Supply Department Tender

Plain cement concrete 1:4:8 mix (One cement four sand and eight aggricate) using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, finishing and curing etc complete.

Randum Rubble masonry in cm 1:5 mix (One cement and five sand) using new rough and bond stones including simultaneous pointing with same mortar cost and conveyance of all materials at sites and labour charges etc., complete complying with standard sp

Brick work in cement mortar 1:5 (One cement and five sand) mix using country bricks 23cmx11cmx7cm of best quality including cost and conveyance of all materials and labour etc.complete.

Centering for soffits of RCC slabs plane surface including strutting upto 3.00 height using mild steel of size 90cmx60cmx10 gauge fitted with MS angle of size 25mmx25mmx3mm laid over silver oak (CW) joists of size 10cmx6cm spaced at 90cm c/c and supported by causrina props of 10cm to 13cm dia spaced at 75cm c/c complying with standard specification.

A)For Column

B)Without Struting

C)Without Struting

Supplying and fabrication placing in postion of M.S. (or) RTS rods for required size and length as directed by the departmental officers approved design including bending cutting tying and cost of binding wire cost and conveyance of all materials to site etc., complete as per standard specification

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Plastering with cement mortar 1:5 mix (One cement and five sand) to 12mm thick including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification.

Plastering cement mortar 1: 3 mix to 10mm thick mixing with leak proof compound including all labour charges cost and conveyance of all materials to site etc.,complete as per standard specification.

Flooring finishing with cerimic tiles of size 30cmx30cmx6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.40kg/1m2 including finishing, jointing and painting flush with tiles surface etc., complete

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Stucco Plastering 20 mm thick using blue granite chips of size 10 mm and below over a base plastering with cement mortar 1:3, 20mm thick,including cost and conveyance of all materials to site etc,complete as per standard specification.

Dadooing in walls with GLAZED TILES(color) of size 305x200x6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white or color cement using 0.40 KG /1m2 including finishing the joints and painting with tiles surface including labour charges cost and conveyance of all materials to site etc.,complete as per standard specification.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work As per Pwd SOR 2021-2022 Pg no:- 65

R.C.C.Jolly by a new of following size in R.C.C. 1:1.5:3 using 20mm gauge hard broken granite stone jelly and river sand excluding cost of reinforcement but includingcharges,fabrication charges curing neat finishing and labour charges for fixing the jolly in position with standard spefication

Painting with cement paint two coats with approved quality of weather Shiled paint over the plastered surface including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Painting two coats with best approved quality of enamal paint over one coat of priming for new iron work including all labour charges etc., complete as per standard specification

Supplying and fixing in position of Indian make colour water closet of size in 53cm (21") orissa pan type with 'P' or 'S' trap and with sand cushion and etc.,complete with necessary connection including all labour charges cost and conveyance of all materi

Supplying and fixing in position of EWC standard size colour glazed earthenware with cost of "P" trap flush tank with connections etc., complete as per standard specifications

Supplying and fixing in position of Squatting Urinal and with cement mortar and etc.,complete with necessary connection including all labour charges cost and conveyance of all materials

Supplying and fixing of 100mm dia PVC vendilation pipe and cowl etc.,complete with necessary connection including all labour charges cost and conveyance of all materials to site.

Supply and delivery of PVC Pipe and G.I Pipes Specials approuved quality of departmental officers loading, unloading, Frieght and transit insurance etc., Cost and conveyance of all materials to Site etc., Complete

11/2 pvc pipe

11/2 pvc coupling

11/2 pvc bend

11/2 x 3/4 pvc reducer

11/2 pvc tee

3/4 pvc sprankler

3/4 pvc pipe

3/4 pvc tee

4" pvc pipe

4" pvc elbow

4" pvc coupling

4" pvc bend

pvc solvent

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) (SD25)

Wiringwith2x1.5sq.mm.(22/0.3)PVCinsulatedSCunsheathedcopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessorieswith150mmx100mmx113mmTWswitchboxinflushwithwallwith3mmthickhylemsheetcoverfor5A3pinnoninterlockingwallsocketwith5Aflushtypeswitchwithpaintingofsuitablecolourwithcontinuousearthwireconnectionof14SWGTCwireforopen PVC plug point(SD25)

Wiringwith2x4sq.mm.(56/0.3)PVCinsulatedSCunsheathedcopperconductorcableof1100VgradeinsuitablepipeonwallandceilingwithPVCaccessorieswith150mmx100mmx63mmTWswitchboxfor15A3pinnoninterlockingwallsocketwith15Aflushtypeswitchwithpaintingofsuitablecolourwithcontinuousearth wire connection of 14 SWG TC wire for open PVC power plug point(SD39)

Supply and fixing of 32 Amps TPN switch of 500V with fuse and neutral on suitable TW box PWD earthing etc., Complete

Supply and fixing of single box type 4'-40W flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of Tube Light [SD 88 ]

Supplying and fixing of water tight Bulk head fitting with guard (Philips/bajaj /crompton/Klite) suitable for incandescent lamp and 60W bulb.[SD 85]

Supply and fixing in position of 110mm dia PVC rainwater downfall pipe with necessary PVC shoe,PVC bend, TW plug, Ci clamps including all labour charges cost and conveyance of all materials to site etc., complete as per standard specification