Municipal Administration And Water Supply Department Tender

Supply, Fabrication and erection of fabricated ducting made up of GI Sheets 24 gauge with 6mm thick XLPE sheet insulation including all cost of materials & Conveyance etc., Completed.

Supply and providing of acoustic for initial portion of ducting with 12 mm thick fibre glass Rigid board covered with Tissue Paper and aluminium perforated Sheet including all cost of materials etc., Completed.

Supply and providing of Thermal insulation 9 mm thick vidoflex with aluminium foil including all cost of materials etc., Completed.

Supply and fixing of extruded aluminum powder caoted, supply and return Air Grills / Diffusers with volume Control Damper including all cost of materials etc., Completed.

Medical Gas Copper Pipeline arrangement to hang on the wall of socket type connection installation of seamless cleaned and degreased non arsenical phosphorous gas (tee, elbow, reducer, coupling). The copper pipelinescomplete with brazing work including all copper fittingcopper pipe line with saddles (tee, elbow, reducer, coupling). The copper pipelines should be tested suitable for a steam of working pressure of 17.34 kg. / cm2 (17 bar) and confirm to BS 864 Standard with specially made for brazed socket type connection. The medical gas copper pipeline should be tested as per standard and commissioning after painting as per International Code No. IS2379/1963 Table-V. The pipelines installed at the various wings and floors etc., complete as directed by the Departmental Officers as per IS Code 12827 / 1989 & ISO 7396 / 1987 Specification.

42mm OD 1.20mm Thick Copper Pipe

28mm OD 0.90mm Thick Copper Pipe

Supply and providing of Pipeline Nitrle rubber insulation for Refrigerant and drain pipelines including all cost of materials etc., Completed.

Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor level using Perforated Sheets (10mm thick) including all cost of materials & conveyance etc., completed.

Supply and laying of flexible copper cable for power communication system 4 core 2.5 sqmm flexible cable including labour charges and tools and tackles etc., Completed.,

Scaffolding Charges for Vimanams and Gopurams with Casurina Posts Coconut of Palm Trees wherever necessary for main, form work and providing with net lawn/ PVC Mesh Coverings, Providing ladder arrangements, Country Wood plank for working, inspection etc., Complete, hire charges only for erection, maintenance and removing the same on completion of the work.

Supply, fabrication and fixing of MS Channel for Mounting the Airconditioning Oudoor Unit including all cost of materials and conveyance etc., Completed.

Electrical work for Ductable AC Supply of Main control Board SMP Electrical Panel Board Provision of 250 A MCCB 2 Nos and with 400 A TPN switch with fuse - 1 Nos with suitable copper bus bar in CRC sheet steel enclosures of 2mm thick with all stiffness supports powder coated (Siemens Grey) with proper earthing arrangements – Qty 1 Nos Vertical TPN distribution board with 12 way 36 modules including all Cost of materials & Labour charges etc., Completed.

Supplying & Fixing of 250 A 4 Pole MCCB including all Cost of materials, Conveyance & Labour charges etc., Completed.

Supplying & Fixing of 400A TPN Switch with HRC fuses Sheet Steel Double break including all Cost of materials, Conveyance & Labour charges etc., Completed.

Miniature Circuit breakers 240V / 415 V 50HZ - AC 63 A MCB 4 pole including all Cost of materials, Conveyance & Labour charges etc., Completed.

Supply of 200 A capacity 12 way vertical Distribution Board with 200 A MCCB 1 No provision incomer with copper bus bar and 63 A MCB 4 pole 5 Nos Provision and 20 A 2 pole MCB 4 Nos including all Cost of Materials & Labour charges etc., Completed.

Supplying & Fixing of 250 A 3 Pole MCCB including all Cost of materials, Conveyance & Labour charges etc., Completed.

Miniature Circuit breakers 240V / 415 V 50HZ - AC Triple pole 63A MCB including all Cost of materials, Conveyance & Labour charges etc., Completed.

Supplying & Fixing of 20 A MCB Double Pole including all Cost of materials, Conveyance & Labour charges etc., Completed.

Supply and laying 3.5 core 95 sqmm aluminium armoured cable including cable laying, End Terminations, cable lugs, gland with proper clamping including all labours, tools tackles etc., Completed.

Supply and laying of 4 core 10 sq.mm. armoured copper cable for power wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers.

Supply and laying of 3 core 1.5 sqm PVC Power cables including all cost of materials & Coveyance etc., Completed.

Supply and erection of 32 mm drain pipe including all cost of materials & Conveyance etc., Completed.

Fabrication and erection of Aluminium Trap door with wooden frames at the machines (Indoor unit) with Plywood door protection including all material, labour and tools and tackles etc., Completed.

Painting two coats with ready mixed Interior Plastic Emulsion Paint approved quality and colour with Primer for Plastic Emulsion Paint, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m S.No 358

Supply and erection of Air cutter of 4 feet length including all cost of Materials & Conveyance etc., Completed.

Supply and fixing of Flexible Canvas Connection including all cost of Materials & Labour charges etc., Completed.

Supply and filling of Refrigerant R-22 gas including all cost of Materials & Labour charges etc., Completed.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer