Municipal Administration And Water Supply Department Tender

Providing and laying in position ,standardised concrete mix M-20 Grade in accordance with IS 456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement concrete of 325kg/M3 and maximum water cement ratio of 0.55, including admixture (plasticiser/super plasticiser) in recommended proportions as per IS :9103 to accelerate ,retard setting of concrete , improve workability without perparing strength and durability with about ( 5 cu.m) 7730 kg of 20mm machine crused stone jelly and with about (3.30cu.m) 5156 kg of 10-12mm machine crused stone jelly and with about (4.79cu.m) 7670kg of sand, but excluding cost of reinforcement grill and fabricating charges , centering and shuttereing and also including laying , vibrating with machanical vibrators ,finishing curing etc., and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claiming etc., complete complying with standard specifications and as directed by the departmental officers. The coarse and fine aggregates to be used should be comply with the requirments of IS standards.( No separate payment will be made by the department for the excess usage of materials).charges

Brick work In CM 1:5 mix using best country bricks of size 8 3/4 x 4 1/4 x 2 3/4' having 350kg/cm2 compressive strength and 15% or less water absorbentin the period of 24hours immersement and confirming to ISI specifications.and using the screened sand and all the materials should be approved by the competent technical authorities etc complete complying with standard specification

Plastering in Cement Mortor 1:5 Mix (one part cement, Three sand ) 12mm thick including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specification.

Supplying and fixing of rolling shutter as per standard specification complete including all cost etc., complete

Paving the floor with palin/design (desin should be got approved by the departmental officers before purchase) Marbonite tiles (colour and shade as directed) of size 605 mm x 605mm x 6mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement etc completecomplying with standard specification.

Suplying and fixing of TRUSS and PURLINS CHANNELS using (ISMB , PL ISMC , ISA) confirming to IS code as specified including cost of materials and labour charges for cutting to required sizes,fabricating,welding , transporting and erection at site of work and including the cost of one coat red oxide primer etc., complte complying as directed by the departmental officers.

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5A FT switch covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point SD 37

Wiring with 2 x 4 Sqmm ( 56/0.30) SCunsheathed sc Cu. Conductor of 1100v grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessiories with 150 x 100 x 113 mm T W switch box and 15 A 3 pin non interlocking CS plug with painting of suitable colour with continious earth wire connection of 14 SWG wire and making good of the concealed portion with suitable colour for concealed Power Plug point SD 38

Supply and run of 2 of 1.5 Sq.mm ( 22/0.30) PVC insulated SC unsheathed Cu. Conductor of 1100V made i9n suitable heavy gauge MS conduit pipe concealed in wall and ceiling with continious eath wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour ( service wire ) SD 62

Supply and run of 2 of 4Sqmm (56/0.30) PVC insulated Cu. Conductor of 110 V grade on 7/20 G.I. bearer wire for service connection mains SD 69

Supply and fixing of WT bulk head fitting with guard ( philips / Bajaj / Crompton / K. lite ) suitable for incendescent lamp with 100 W bulb) SD 84

Supply and fixin of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with tubes SD 88

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD127

white washing two coats using best shellime and preparing the surface fit for white washing as confirming to the IS 6278-1971

Paintinting two coats for New iron work surface using best quality synthetic enamel paint etc complete complying with standard specification