Municipal Administration And Water Supply Department Tender

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Centering for soffits of RCC slabs plane surface including strutting upto 3.00 m height using mild steel of size 90cmx60cmx10 gauge fitted with MS angle of size 25mmx25mmx3mm laid over silver oak (CW) joists of size 10cmx6cm spaced at 90cm c/c and supported by causrina props of 10cm to 13cm dia spaced at 75cm c/c complying with standard specification.

Plain Cement Concrete 1:3:6 (one cement, three fine aggregates and six coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Plastering with cement mortar 1:5 (One cement and five sand) 12mm thick including cost of all materials and labour including curing charges complete as per standard specification (TBDSS No. 61, VI (4)3)

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supply and Fabrication of Roof Truss with 'L' angle and channel including all taxes and all transport charges

Supply, Delivery and Erection of 10KVA Diesel Generator 3 Phase, 415 Volt, 1500 RPM, Frequency 50 HZ, Power Factor 0.80, Liquid Cooled Diesel Generator for Producing Electricity with a 4 Cylinder Engine Developing 23.45 BHP Complete in all respects and supplied with 20 KVA alternator and CPCB - approved acoustic enclosure with automatic (AMF) control panel, battery, leads and a 90 litre integrated fuel Tank, door locks and hinges, residential silencer with cost of all materials etc., including all civil works like DG set foundation, Earth pit digging, cable trench all duties and taxes are applicable including all Transport charges and erection of GI pipe for earth station, GI strip, Power Cable, cable GI wire, End Terminator and 63 Amps change over switch and all labour charges for Erection and commissioning of Genset As per Standard Specifications.