Municipal Administration And Water Supply Department Tender

Supply and fixing of Crompton High flo Cressida wall mounted fans with 400mm with connection only.

Supply and fixing of 1No 100A MCB Isolators, 3 Nos 63A 30MA ELCB and 6Nos 32A SPMCB Switchon existing 8W 7S TPNMCB DB with connection. (Higher End Crabtree/ Legrand/ Hager make) (DATA-5)

Supply and fixing of 6A/16A combined socked 2 module with concealed in suitable 3 module flush mounting box (GI) in flush with wall and 3 module white cover plate with frame (Plastic) (Higher End Crabtree/legrand/hanger make) with Painting. (DATA-6) [For AC unit]

Supply and fixing of 20A DP 1W Switch 2 module with concealed in suitable 3 module flush mounting box (GI) IN flush with wall and 3 module white cover plate with frame (Plastic) (Higher End Crabtree/ Legrand/ Hager make) with painting. (DATA-6) [For AC unit]

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection 14 SWG TC wire with painting of suitable colour [SD-54]

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour [SD -56]

Supply erection testing commissioning of 1.50TR (4500 Kcal/Hr ) ABS plastic split type Air Conditioner Confirming to IS1391[Part 2] 1992 with Rotary compressor operating on refrigerant R22/Non CFL suitable for wall mounting for operating on 230V 50HZ single phase AC supply with Three Star rating Model as per BEE Specification and capable of performing the following functions. A)Cooling, B) dehumidifying C) Air circulating D)Filtering the installation work for the above split type AC units inv=cludes the following 1.Mounting /fitting indoor and outdoor units at their respective location. 2. Laying refrigerant pipe line of 6mtrs distance and connecting the both units after drilling hole in the wall if required thickness of the copper tubing shall not be less than 0.80mm. 3. Insulating the suction pipe with expanded polythene foam 5mm thick tubing. 4. Laying 15mm dia flexible PVC drain pipe of 6mts length to throw out the condensate water being formed in the indoor unit. 5. Leak testing the entire gas unit 6.Charging refrigerant gas in the unit. 7. Suitable electric wiring to be orovided with 2.5sq.mm PVC insulated copper wire between indoor and outdoor units up to 4mtrs length and up to switch within 3mtrs of location of indoor unit.(Make - Carrier/voltas/Blue star make only) [SR]

Supply and fixing of 5KVA Automatic voltage stabilizer of wall mounting type with Automatic time delay switching arrangements suitable to operate on 230V Single phase supply.

Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3Mtrs supplied with AC Unit) (SR)

Supply and fixing of MS Stand for fixing outdoor units.[SR]

Supply and fixing of water drain line (1" PVC Pipe) (For Split AC Unit ) [SR]

Supply and fixing of 100A TPN Switch Disconnector fuse Units interior only with HRC Fuses Double Break on existing panel board with connection [DATA-8]