Municipal Administration And Water Supply Department Tender

Providing and laying tack coat of 7 kgs/10 sqm over B.T surface treated with binder using 2 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications.

Providing and laying tack coat of 2.5 kgs/10 sqm over B.T surface treated with binder using 2 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications.

Providing and Laying 50mm Consolidated thick Dense Bituminous Macadam Using 0.24 cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20 Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 ton CMP with bitumen boiler, tipper trucks, Paver finisher / 9m paver finisher , Vibratory / Pneumatic rollers and other tools and plant required including fuel and all other incidental charges etc.,complete as per specification using CMP as per clause 505 MORTH

Providing and laying Bituminous Concrete to 30 mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of VG30 /VG40 bitumen for premixing per 10sqm including cost and conveyance of all material to CMP site. heating the bitumen and aggregate to the required temperature and mixing the minimum required Temperature in central hot mix plant 20-30 tonnes capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonns Vibratory/ Pneumatic Roller to their required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 ton CMP with bitumen boiler , tipper trucks, paver finisher / 9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plants required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev specification using.

Supply of FRC Manhole 600mm size dia cover with frame including cost of conveyance loading fixing the same etc complete.

Raising the existing circular manhole in heavy type including the removing the existing man hole cover with frame and dismantling the existing the cement concrete wall and tar road surface around the manholes using for raising the manhole with 1:2:4 (25 mm height 30cm height) including centering inside the manhole laying 15cm thick cement concrete 1:2:4(one cement two sand four aggregates) with 20mm granite chips for finishing the top surface of manhole etc., complete

Road marking with hot applied thermo plastic compound with reflect rising glass beadsd on Bituminous surface Providing and laying of hot applied thermo plastic compound 205mm thick including reflect rising glass beads @ 250gms.per sqm. area. thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level uniformand free from streadks sdand hole set complete. (as per MORT & H Specification No 803)

Add GST 18%