Municipal Administration And Water Supply Department Tender

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification

Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS1) for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete

Providing and laying tack coat of 2.5 kgs/10 sqm over the Prime WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS1) for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24 cum of 26.50-13.20mm, 0..25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20 Kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site,heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading themix to uniform thickness of 50mm with paver to the specified grades and cross sections and compactedby Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks,Paver Finisher / 9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP

Providing and laying Bituminous Concrete to 30 mm thick using 0.0975 cum of 19.00-9.50mm, 0.1275cum of 9.50-2.36mm and 0.1950 cum of 2.36 and below with 37.725 kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating thebitumen and aggregate to required temperature and mixing them in required temperature in centralhot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and crosssections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc.,including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory /Pneumatic roller and all other tools and plant required, including fuel and all other incidentalcharges etc., complete as per specification using CMP

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, Stone Dust 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Providing and laying of hot applied thermoplastic compound 2.5mm is exclusive of surface applied glass beads 250gm per Sqm area thickness of 2.5mm is exclusive of surface applied glass beads asper IRC B35 the finished surface to be level uniform and free from streaks and holes etc., complete. for centre line and edge line

Manufacturing Supply and Fixing of Retro Reflective Road Name Sign Board Single Arrow of Size 1.2 x 0.6m made out of wide angle cube corner micro prismaic grade sheeting conforming to IRC-67 2010 & Type XI standard of ASTM D4956-09 Specifications and fixed over 2mm thick auminium sheet & back support frame of 25x25x3mm MS angle frame supported by 38OD stainless steel pipe grade 304 AISI with wall thickness of 1.5mm all around and 50 OD Pipe vertical post with wall thickness of 2mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cm x 30cm x 45cm etc., complete. the information message shall be made out of cut letters in blue color transparent overtay film asper IRC 67-2010 Guideliness 7 Years warranty for retro reflective sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an independent test lab for the product shall be submitted by the contractor