Municipal Administration And Water Supply Department Tender

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications.

Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications.

Providing and laying tack coat of 2 kgs/10 sqm over the WMM surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications.

Providing and laying 50mm compacted Bitumenous macadam using 0.24 m3 of 26.5-13.2 mm graded metal and and 0.10m3 of 13.2 – 2.36mm graded metal and 0.18m3 of 2.8mm & below with 53.20kg of bitumenous for premixing per 10 m2 including cost and conveyance of all materials to CMP site heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 Tonnes capacity, conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 50 mm with mechanical paver to the specified grader and cross sections and compaction by 80-100 KN power roller to the required density etc including labour for loading bitumen into bitumen tank and metal to feeder unit, labour for attending to paver site etc including hire charges and Fuel charges for 20-30T CMP with bitumen Boiler, tipper trucks, paver Finisher Power rollers and all other tools and plant required including all other tools and plant required including specification using cmp clause 504 of most

SDBC Providing and laying of 25mm compacted thick Semidence Carpet using 0.10m3 of 11.2mm IRC metal/ 0.16m3 of 6.7mm IRC metal and 0.11 m3 of 2.8mm and below with 21.60 kgs of bitumen of grade 60/70 and 10% plastic for premixing per 10 m2 including cost and conveyance of all materials to CMP site, heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 tonnes capacity conveying the mix by tipper trucks to power site spreading the mix in required temperature for uniform thickness of 25mm with mechanical paver to the specified grades and cross section and compaction by 80-100 KN power roller to the required density etc., including labour for loading bitumen into bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel charges for 20-30 T CMP with bitumen boiler, tipper trucks, power finisher power rollers and all another tools and plant required including all other incidental charges etc., complete as per specification using CMP clause 511 of most specification.