Municipal Administration And Water Supply Department Tender

Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications

Providing and laying 50mm compacted thick Dence bituminous macadam using 0.35 cum of 26.5-13.2 mm graded metal and 0.21 cum of 13.2-2.36 mm graded metal and 0.14 cumof 2.36 mm and below metal with 24 kgs of cement and 46 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant by the hot mix plant 20-30 tonnes capacity conveying the mix by tempper tracks to paver site, Sprating the mix in required temperature for uniform thickness of 50mm with mechnical paver to the specified grades and cross section and compaction by 80 - 100 kl power roller to the required dencity etc., including hire charges and fuel charges for 20 - 30t CMP with bitumen boiler,tipper, paver finisher, power rollers and all other tools and plants required, including all other incidental charges etc., complete using C M P clause 507 of MORTH spefications.

Providing and laying bituminous concrete to 30mm thick using 0.13 cu.m of 19.00-9.50mm graded metal 0.17 cu.m of 9.50-2.36mm graded metal and 0.26 cu.m of 2.36mm & below metal by adding the shredded plastic waste over the aggregate heated to 170 degree celcious in the central hot mix plant, mixed well with 45.27 kgs of hot bitumen VG 30 Bitumen (160 degree celcious) 60/ 70 grade for premixing per 10 sqm to lay 30mm compacted thick of bituminious concrete including the cost materials ( the cost of Municipality / Corporetion Plastic Waste obainted by the contractor from the Municipality / Corporation will be Recovered) and conveyence of all materials to C M P site, heating the bitumen and agregates to the required temperature and mixing the minimum required Temperature in central hot mix plant 20 - 30 tonnes capacity conveyeing the mix by tipper trucks to paver site, spreading the mix in requires temereature for uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory/Pneumatic Roller to the required density etc., including labour for loading bitumen in to bitumen tank and metal to feeder unit, labour for attending to paver to site etc., including hite charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory/Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH revision 5

Providing Laying Hot applied thermoplastic compound 2.5mm thick including reflective glass beads @250gms per sqm area thickness of 2.5mm as per IRC :35.The finished surface to be level , uniform and free from streaks and holes all complete as per Technical specification and as directed by the Engineer-in-charge

Supply and fixing of Retro Reflective Single arrow road name sign board of size 1000mm x 500mm made out of retro reflective sheeting confirming to Type XI standards of ASTM D 4956 - 09 & as per IRC 67-2012 specifications fully covered over 2mm thick aluminium and back support frame SS angle of 15mmx20mmx1.2mm supported by 38mm OD stainless steel pipe all rounding 304 grade and 2 Nos of vertical posts of 75mm OD stainless steel pipe of 202 grade firmly fixed to the ground by means of properly designed foundation of size 300mmx300mmx450mm with M15 grade cenebt cibcrete abd tge uten shall include earth work excavation, cost of all materials, loading, unloading, lead, lift, transportation etc., complete. The sign board background shall be blue in colour with letters and border in white. 10 years pre-qualification warranty as per clause 6.9 of IRC 67-2012 for type XI retro reflective sheeting from the sheeting manufacturer & a certified copy of test reports from an independent test laboratory confirming to clause 6.7 of IRC 67-2012 including 3 years outdoor weather exposure report for the retro reflective sheeting offered shall be submitted by the contractor for technical qualification in the tender.