Municipal Administration And Water Supply Department Tender

Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.

Supplying and erecting centering for sides and soffits without supports for plain surfaces such as PCC etc., using mild steel sheets of size 90cm x 60cm and 10 gauge stiffened with Mild steel angles of size 25x25x3mm for boarding laid over silver oak (country wood) joists of size 10cmx6.5cm spaced at about 90cm c/c and side supported by casurina poles of 10cm to 13cm dia. placed at 75cm c/c etc., complete.

Cement concrete 1:2:4 (One cement two sand four aggregates) mix using 20mm gauge hard granite broken stone jelly for bed blocks including cost and conveyance of materials to site and all labour charges etc complete with standard specification.

Supply and fixing of RCC precast slab in cement concrete 1:1.5:3 mix (One cement one and half sand and three aggregate) using 20 mm ISS metal including cost of moulding charges mixing, laying and curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification but excluding cost of reinforcement-100mm thick

Supplying and Fabrication of Steel and placing in position MS / Ribbed tor steel Grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc,. Complete complying with standard specification in force - per Quintol.

Weathering course concrete broken brick jelly 20 mm size in pure slacked lime over RCC roof slab in proportion 32:12.5 for required depth of the giving required slope and thickness of roof well beaters by the wooden beaters etc., complete as per standard specification

Finishing the tp of Roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality in cement mortor 1:3 ( one part of cement and three part of plastering sand CP-Sand) 12mm thick mixed with water proofing compound confforming to ISS 2% by weight of cement used and the joints pointed. Neatly to full depth of tiles with the same cement mortor mixed with red oxide and water proofing compound including curing etc.,

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Plastering in cement mortar 1:3 mix 10mm thick using clean screened sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification.

Painting two coats as old iron work with best quality synthetic enamel paint of approved quality and colour over old iron works including cost, conveyance of all to site and labour charges etc., complete complying with standard specification.

Painting Two Coats on old wood works two coats with best synthetic enamel paint of approved colour and quality

Painting two coats with ready mixed plastic emulsion paint of First class quality of approved colour etc., over plastered surface including priming coat and cost and conveyence of all meterials etc., complete as per standard specification.

Providing and fixing PVC rain water downfall pipe with necessary T.W.Clamps plugs, shoes, bends,other clamps, screws nails etc., complete complying with standard specification.The rate is inclusive of cost of removable iron gratings of appropriate size.The size of Teak wood plugs used is 150x25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed etc., complete.

110mm dia Pipe