Municipal Administration And Water Supply Department Tender

Providing and laying tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and laying 50mm Consolidated thick dense Bituminous Macadam using 0.24cum of 26.50- 13.20mm 0.25 cum of 13.20-2.36 mm and 0.23cum of 2.36mm & below and with 53.20kgs of VG30/VG40 of bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required tempearture in central hot mix plant 20-30 ton capacity , Conveying the mix by tipper trucks to work site spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges for 20 -30 t CMP with bitmen boiler, tipper trucks, Paver finisher / 9m Paver Finisher Vibratory / Pheumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc.,complete as per specifications.using CMP as per Clause 505 MORTH Rev-5

Providing and laying Bituminous concrete to 30mm/40mm thick using 0.13cum of 19.00mm to 9.50mm ,0.17 cum of 9.50 - 2.36mm and 0.26 cum of 2.36 mm and below with 50.30kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, 10sqm including cost and conveyance of all materials CMP site heating the bitumen and aggregate to required temperature and mixing them in required tempearture in central hot mix plant 20-30 ton capacty , Conveying the mix by tipper trucks to Paver site, spreading the mix to uniform thickness 30mm with mechanical paver to the specified grades and cross section and Consolidated by 8-10 ton vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20 -30 t CMP with bitumen boiler, tipper trucks, Paver finisher / 9m Paver Finisher, Vibratory / Pheumatic rollers and all other tools and plant required including fuel and all other incidental charges etc.,complete as per specification using CMP as per clause 507 MORTH Rev-5 .

Providing and laying of hot applied thermoplastic compound 205 mm thick including reflect risig glass beads @ 250 gms. per sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC : 35. The finished surface to be level uniform and free from streaks and holes etc., complete. (as per MORT & H Specification No : 803)

Manufacturing supply and fixing of Retro - Reflective Road Name Sign Board Single Arrow big size made out of wide angle cuble corner micro prismatic grade sheeting conforming to IRC 67:2010 & type XI standard of ASTM D4956 - 09 specifications and fixed over 2mm thick aluminium sheet back support frame of stainless steel supported by 32NB stainless steel pipe all around 65NB pipe vertical post firmly fixed to the ground by means of property designed foundation with M15 grade cement concrete 30cm x 30cm x 45cm etc., complete. The information message shall be made out of cut out letters in blue colour transparent overlay film as per , IRC 67-201 Guidenlines , 7 years pre qualification warranty for Retro-Reflective sheeting from the original sheeting manufacture & a certified copy of three years out door exposure report from an independent test lab for the product offered shall be submitted by the contractor. the sign board shall be Retro-Reflective type XI . The Retro- Reflective sheeting should have manufactures WATER MARK on the sheeting surface for identification. single arrow big size 36'' x 18''.