Municipal Administration And Water Supply Department Tender

Super Structure

Special Ceiling Plastering for RCC slabs and beams with cement mortar 1:3 mix 10mm thick including hacking etc., complete

Plastering with CM 1:5 mix 12mm thick etc., complete

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from unplasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

UPVC Ventilator Specification: Supplying and fixing UPVC (Un~Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/lmm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frarnes. The ventilator should be got approved from the Executive Engineer before use on work

Supply and fixing of solid PVC door shutters using 19 gauge 19mm MS sq. tubes for styles and outer frames, 15mm MS sq. tybes per top, cock and bottom rails. The steel tubes shall be accured with 5mm tk solid PVC sheets shutter using 5mm thick solid PVC sheets for panelling shall ragid by fixed in position including necessary furniture and fittings. The occer shall size ot top rails, lock rail and bottom rail shall be 75mm x 30mm. the above occer all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter soild panel PVC door with frame etc., complete

Flooring with Cement based Hydraulically pressed Anti skid tiles (pattern design) -20mm thick of approved colour and quality in cement mortar 1:3 mix and pointing with the same mortar etc. complete and finish very neatly

Supply and fixing in position of white glazed indian oriya type water closet 580 x 440mm size white glazed earthernware of approved quality with S or P trap confirming to IS: 2556-part XII with sand cusion and forming flooring around the closet using 40mm broaken brick jelly in lime concrete 1:4:8 mix, 100mm thick using 20mm ISS gauge brick jelly and finished the top to required slop and including giving necessary connection to cast iron soil pipes by dismantling brick masonry, RCC/ floor slab and making good of the disturbed portion to original condition without leakage etc. complete complying with std. specifications and as directed by dept. officers etc.complete.

Supplying and fixing in position best quality approved make white glazed earthen ware wash hand basin size 550mm x 400mm with a pair of cast iron brackets including cost of 15mm Φ brass chromium plated pillar tap, 32mm Φ C.P. waste, 32mm Φ PVC waste pipe with rubber plugs and chain, 15mm Φ G.M. Wheel valve 15mm Φ brass nipple, 15mm Φ Nylon connections etc. Including fixing the wash hand basin in the wall in position with a pair of C.I. Brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc. complete as per standard specifications.

Supply and fixing in position of European water closet with 'S' (or) 'P' trap of approved color and quality with dauble flapped rigid PVC sheet cover the CP brass hinges etc., complete complying with standard specification including supply and fixing in position of 10litre capacity glazed porcelain low level flushing tank on wall including 2 Nos of 15mm & brass nipple, 15mm dia PVC brass connection, 15mm dia GI wheel value, 15mm dia Nylon connection and giving necessary water supply connection etc., complete complying with standard specification

Dadooing the skirting the wall with white (or) colour glazed tiles of tiles of size 15cm x 15cm x 6mm laid in cement mortar 1:2 mix – 10mm tk. and pointing with white cement using 0.40kg. /m2 including finishing the joint and pointing flush with tiles surface etc., complete.

Flooring with ceramic tiles of size 305 x 305 x 6mm of approved colour and 1st quality design in cement mortar 1:3 mix and pointing with the same mortar etc. complete and finish very neatly etc.complete.

Supply and fixing of following water supply materials at site with best quality etc.,complete

32 mm dia UPVC pipe Above

25 mm dia UPVC pipe Above

Supply and fixing of following water supply GI specials at site with best quality etc.,complete

32 mm dia UPVC coupling

25 mm dia UPVC coupling

32 mm dia UPVC Elbow

25 mm dia UPVC Elbow

32 mm dia UPVC Tee

25 mm dia UPVC Tee

32 mm dia GM Gatevalve

25 mm dia GM Gatevalve

32 mm dia UPVC Union

25 mm dia UPVC Union

PVC Screw Down Tap

110mm Dia PVC Pipe 6 ksc

110 mm dia PVC Elbow

UPVC Adhesive

Conveyance of 110 mm dia PVC rigid pipes to proper grading and alignment jointing with pre cement paste and testing to the required pressure etc., complete.

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch boc 5A F.T. switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable color for concealed PVC light / fan point (for elctronic regulator) SD-24.

Wiring with 2X 1.5 sqmm (22/0.3) PVC insulated Sc unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113mm TW switch box and 5A 3 pin non inter locking CS plug with painting of suitable color with continuous earth wire connection of 14SWG TC wire for concealed PVC plug point ( SD-38)

Supply and fixing of single box type 4'40W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceilig with flu tube with PVC unsheather copper leads from terminals SD(88)

Supply & fixing of 1200mm AC ceiling fan complete set with steped electronic regulator with existing clamp SD no: 107.

White washing with 2 coats of best shell lime etc..omplete

Painting two coats with ready mixed plastic emulsion paint of 1st class quality and of approved color over a priming coat including through scraping clean removal of dirt etc., complete.

Supply and Fixing of 110mm diaRain water Down fall pipe including cost of material ,shoe ,bond,brackets teakwood plugs etc..cpmplete.

Supply and fixing of vinyle name board of size 2.40x1.20 m size with corporation embalom and lettering as in Tamil as directed by the departmental officers including framed with 50x25mm country wood reepers outer finished with 1”x1” Aluminium beeding with all material and labour cost for fixing etc., complete

Conveyance of excavated earth and dismantled materials to a lead of 2km including loading unloading charges and filling up in the low lying area as directed by the departmental officers etc., complete