Municipal Administration And Water Supply Department Tender

Supply and fixing of First Order Lever including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Newton's Third Law including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Sun Dial including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Floating Bird including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Second Order Lever including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Persistence of Vision including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Musical Tubes including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Simple Camera including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Periodic Table including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Double Ended Cone including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Xylophone including cost and conveyance of all materials and all other labour charges etc. complete.

Supply and fixing of Humidity Meter including cost and conveyance of all materials and all other labour charges etc. complete.

Providing Stainless steel entrance name board 20 feet x 3 feet size board SS stand pipes from gl to 15 feet hight aluminium composit pannel leteer board and fixing in metal letters 12inches hight including cost and conveyance of all materials fabrication charges and all labour charges and foundation arrngements ec complete

Supplying, Fabricating, Erecting structural steel work for roofing welding or bolted type using MS Channels, angles, plates and round bars etc conforming to IS specification including primer coating and enamel painting as per Design given by the departmen

Fabrication

Bolt & Nut

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with red colour or any other approved design 0.47mm thick 24 gauge having width 1050mm. The sheet should be GI base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws, plastic washer. The washer and screw to be fixed by using miute power machine drilled without damaging the sheet paint coating to be regular modifies polyester coat with zinc coating of Z 120 GSM paint thickness the finish should be terra coatta finish like Malabar Mangalore tiles tile finish optional matt finish. The sheet into the required size and making ornamental designs as per the site conditions and as directed by the departmental officers

Supply and fixing of rain water gutters 0.30x0.30size 25x25x3mm thick "L" angle frames and fixing plain anti corrosive sheet including cost of materials, fabriaction charges and including all labour charges for fixing etc complete as per standard specification

Supplying and fixing Solid Blocks of Following size conforming to S.S 2145-1965 (including jam blocks closers etc.,) made of CC1:3:6 in CM 1:5 (one of cement and five of sand) and partition wall including curing neat finishing etc., complete complying with standard specification and as directed by the departmental officers., (Approved by SE (CW) in ir No.15056/95BD/S1/dated 23.08.1995)(600x200x200)

Paving the floor with best quality Morbonite Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Supplying and painting the walls with two coats of cement paint as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The colour and shade of the cement paint shall be got approved by the Executive Engineer before use of work).

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch Sd 21

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch Sd 21

Earthing as per P.W.D. standard with an earth electrode of 2Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work. SD 234

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40 A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion Sd 179

Supply and laying of the 4x16 sqmm size of PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good SD 203

Supply and delivery of 20 w 4 feet LED Tube light ftting including all cost and conveyanc and all Labour cahrges etc completeles/equivalent)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking CS plug with painting of suit Sd 37

supply and fixing of idustrial wind turbine roof Non electrical ventilation fan,including cost and conveyance of all materials and labour charges etc complete

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete SD 129

Supply and fixing of 3 phase 32A aerial fuse unit for 3 Nos. 32A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps Sd 132

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box in flush with wall Sd 134

Providing cement Mortor Floor finish in Cm 1:3 -20mm thick including cost and conveyance of all materials and including all labour cahrges etc complete

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

Supplying and fixing Cuddapah Slab 20 / 30mm Thick thickness including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

Supplying and fixing in position FRC Manhole covers (heavy duty) of 60 X 60cm in size in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), of best approved quality and as per standard specifications etc.,complete.

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Supply and instalation of 20 Lit per hour capaity RO unit with inbuilt motor pump filter units with one outside menbarane filter and inbuilt 8 Itr storage capacity and inlet valve connection work including cost and conveyance and instalation a