Municipal Administration And Water Supply Department Tender

Providing and laying tack coat of 2.00kgs/10sqm over the BT surface treated with binder using 2kgs of bituminous emulsion for 10 sq.m area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev –V Specifications.

Providing and laying 50mm consolidated thick dense bituminous macadam using 0.24cum of 26.50-13.20mm, 0.25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20 – 30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross section and compacted by vibratory/pneumatic roller to the required density etc., including labour for attending paver at site etc., including hire charges and fuel charges for 20 – 30 t CMP with bitumen boiler , tipper trucks, paver finisher/9m paver finisher, vibratory / pheumatic rollers and all other tools and plant required including fuel and other incidental charges etc., complete as per specification using CMP clause 505 MORTH Rev – 5 (Excluding tack coat )

Providing and laying Bituminous concrete to 30 & 40 mm thick using 0.13cum of 19.00 – 9.50mm, 0.17cum of 9.50-2.36mm and 0.26cum of 2.36 and below with 50.30kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20 – 30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross section and consolidated by 8-10ton vibratory/pneumatic roller to the required density etc., including labour for attending paver at site etc., including hire charges and fuel charges for 20 – 30 t CMP with bitumen boiler , tipper trucks, paver finisher/9m paver finisher, vibratory / pheumatic rollers and all other tools and plant required including fuel and other incidental charges etc., complete as per specification using CMP as per clause 507 MORTH Rev – 5 (Excluding tack coat)

Raising the existing circular man hole in heavy type including the removing the existing the man hole cover with frame and dismantling the existing the cement concrete wall and tar road surface around the manholes using 1:2:4 20mm jelly for raising the existing the manhole wall and using CC 1:2:4 with 20mm chips for finishing the top surface of manhole etc., complete.

Supply of FRC Manhole 600mm size dia cover with frame including cost of conveyance loading fixing the same etc complete.

GST 18%