Municipal Administration And Water Supply Department Tender

Collection and filling of 40mm HBBG metal including cost of materials to site and all labour charges etc complete.,

Brick work in cement mortar 1:5 (one cement and five m. sand) mix using country bricks of standard size 8 ¾” x 4 ¼” x 2 ¾ ” etc., complete.(for Basement)

Brick work in cement mortar 1:5 (one cement and five sand) mix using country bricks of standard size 8 ¾” x 4 ¼” x 2 ¾" etc., complete including curing and conveynance of all materials to site and all labour charges etc., complete as per standard specification for Super Structure

Plastering with Cement Mortar 1:5 mix 12mm thick including cost and conveyance of all materials finishing and all labour charges etc., complete as per standard specification

Supplying and fixing wash hand basin of size 550x440mm with all accessories such as cost iron brackets 32mm dia CP waste coupling rubber plain and chair 32mm dia B class CI waste pipe 15mm dia involved 15mm dia nylon connection 15mm dia brack nipples 15mm dia CI pillar tap etc., complete

Flooring with 20mm thick cement concrete 1:3 mix (no sand to be used) using 3mm to 10mm ISS gauge HBBG chips and the surface rubbed hand and finished smooth with neat cement Ellispattern 1 sort etc.,

Providing False ceiling arrangements using 8mm thick calcium silicate board designed and perforated materials as per std specifications.

Painting two coats with ready mixed plastic emulsion paint of 1st quality and of approverd colour over a priming coat including through scraping clean removal of dirt etc, complete

Supply and fixing of MS Grill Works including cost of material and all labour charges etc complete as per standard specifications.

Painting Priming coat on new iron work etc.,complete.

Roofing with PVC painted Galvalume 0.47mm FRB Sheet including cost of materials and all other labour charges etc complete.,

Supply and fixing of Prepainted Galvalume Ridge / 'L' flashing including cost of materials and all other labour charges etc complete.,

FOAMED PVC DOOR FRAME: Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 Nos. to be provided for each vertical member, GI stiffeners of ('U' channel of size 29 x 9, 1mm, 150mm long) - 3 Nos. at hinge point, frame reinforcement of ('U' GI channel of size 46 x 22 x 0.6mm), bottom tie rod of ('U' GI channel size of 15 x 15 x 1mm), etc., complete complying with the standard specification. The door frame should be got approved from the dept officers before use on work ( PWD page 110 Sl no.M-0676 - 530.00 )

Supply & fixing of UPVC Glassed open type door including cost of material and all labour charges etc complete.,

UPVC Two Track window size 1.20 x 1.30m Supplying and fabrication and fixing in position of anodised natural colour matt finish sliding window in two track in all floors with following sizes. All the three shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded UPVC section for outer frames as shown below with necessary accessories such rubber beading. UPVC clips, rubber beading,handle and fixing 4mm thick clear sheet glass including all required for fabrication etc., complete. Necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers.The Al.Surfaces is to be anodised with matt finish under electrically condition in accordance with ISI 1868/1962 specification for an average anodic film thick of not less than 15 microns. (All materials should be got approved by the dept Engineer before fixing in position)

Supply pf downfall 110mm Rain Water Pipe

110mm PVC Elbow

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch boc 5A F.T. switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable color for concealed PVC light / fan point (for elctronic regulator) SD-24.

Wiring with 2X 1.5 sqmm (22/0.3) PVC insulated Sc unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150x100x113mm TW switch box and 5A 3 pin non inter locking CS plug with painting of suitable color with continuous earth wire connection of 14SWG TC wire for concealed PVC plug point ( SD-38)

Wiring with 2x1.5 sqmm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box inflush with wall, with 3mm thick hylum sheet cover for 15A 3 pin non inter locking flush type CS plug with painting of suitable color with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable color for concealed power plug point (SD-40)

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable color SD-70

Supply and fixing of single box type 4'40W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceilig with flu tube with PVC unsheather copper leads from terminals SD(88)

Supply & fixing of 1200mm AC ceiling fan complete set with steped electronic regulator with existing clamp SD no: 107.

Supply and fixing of 75mm dia RCC collor etc. complete.