Municipal Administration And Water Supply Department Tender

Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specfication.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. a) columns

SLAB AND BEAM

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of crushed stone sand (M - Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials) - a) Upto Basement

Upto Basement

Ground Floor

Supply and fabrication of steel required for all RCC items of works involved in the schedule, cost of steel at site fabrication, labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlapping to the required length whenever necessary and placing the reinforcement in position as as per design given and specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc complete as per standard specification

Fly ash Brick work in CM 1:5 (one cement & five sand) using fly ash bricks of size 230 x 110 x 75mm in standard specifications including finishing, curing etc.., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost)

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting two coats of newly plastered wall surface with approved cement paint over cement plastered wall surface, ceiling and including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required and cost of painting materials, brushes, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer

Painting the new iron work with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat and including cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer.

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Plastering with CM 1:5 (One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57

Special Ceiling Plastering with CM 1:3 (One part of cement & three parts of sand)mix for 10mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:30,56&57

Wiring with 2 x 1.5 sqmm (22/0.3) PVC unhealthed copper cable of 1100v Grade suitable heavy gauge PVC pipe on wall with NS accessories with 150mm x 100mm x 75mm MS switch box 5A 3pin non inter locking system including CS plug pin T.W Box

Supply and fixing of single box type 4feet 18 Crystal Glass LED Tube Light Fitting complete with electronic ballast with TW round blocks on wall or ceiling with led tube with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of fancy glass shade and 11W CFL for BH point. SD-80

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete.-1 m 3

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.....

Supply,laying and jointing G.I Pipes of approved quality and best veriety of B class pipes of the following dia including labour fixing G.I specials including charges for cutting and threading of pipes cost such specials with necessary leak wood plugs, clamps, screws, threadball, sheelac etc.., a) 20mm PVC pipe

20mm PVC Elow

20mm PVC Union

20mm PVC Bend

20mm PVC Tee

Tap

110mm PVC pipe

110mm PVC bend

110mm PVC door Elbow

110mm PVC vent cowl

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W Clamps, plugs, shoes, bends, other clamps,screws, nails etc.., complete complying with standard specifications. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of teak wood plugs used in 150 x 25mm in front & 220 x 75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre pipes to be fixed. 110mm dia PVC pipe [4 Kg/SqCm]

Supply and delivery of 1000 lit capacity and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,complete as per standard specification.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level a) 20mm PVC pipe

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. a) 20mm Gate valve

Supplying and fixing double swing of height 2.40m with 40mm dia MS pipe supports as legs and top bar is 50mm dia the seater is 9mm thick reinforcement rubber with antiskid sequred top with heavy ball bearing and the suspention is 7mm dia electro galvanised chain and the cost shall .inclusive of all materials labours and fixing etc.., complete as directed by departmental officer.

Supplying and fixing of two seater seesaw for below 12 years childrens to a height of 50m width 50m dia leaver and 40mm top bar with MS pipe. The seater is of moulded plastics with inclusive materials.inclusive of all materials labours and fixing etc.., complete as directed by departmental officer.

Supplying and fixing of slide for below 12 years childrens to alength of 3.00 width 80mm dia leaver and 40mm top bar with MS pipe. The seater is moulded plastics the lader frame is made upto 25mm MS pipe handrails 20mm dia MS pipe and the cost shall inclusive of all materials labours and fixing etc.., complete as directed by departmental officer.

Supply and fixing of jungle GYM for below 12 years old childrens to a height of 2.10m width 80mm dia leaver and 40mm top bar with stainless steel pipes. The lader frame is made up of 25mm dia stainless steel pipes the cost shall inclusive of all materials labours and fixing etc.., complete as directed by departmental officer.

Seating Arrangement Supplying and fixing fine Granite stone bench Three seater the size of (1.5m length – 0.60m width) including cost of conveyance all materials and charges for fixing etc., complete.

Supply and fixing of 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length

Supply , delivery and installation of 20 W LED street light as per PWD SOR P.NO-98

Supply and run of 4 x 6 sqmm (84/0.3) PVC insulated SC unshealted Cu. conductor of 1100V on 7/20 GI bearer wire for service connection mains etc., complete.

Supply , delivery and installation of TNEB Board street light luminaire made up of die cast aluminium poder coated and the protector made up of plycarbonate. The luminaire should consist of 6 LED's driven at 700 mA for a total system out put of 15 W. The luminaire should have an IPrating of 65 for both optical and control gear compartment. The protector should have an inbuilt lenses designed for for a proper road lighting photpometry.The life time residual flux tq@35ºc should be L70 at 50,000 hrs. The luminaire should be provided with 10kv surge protection and an impact reisitance of IK07. The luminaire should be suitable for an side entry of Ø32 mm to Ø 42 mm with all suitable clamps and accessories etc., complete as directed by Departmenta officers.

Supply and fixing of 200 Amps. TPN sheet steel double break switch with HRC fused and neutral on suitable angle iron frame work MS cable entry boxes and PWD earthening as per SD 170

Supplying and planting of neem Tree sapling height of 180-240cm in polythene bay of dia 30cm including supporting stack of 5cm dia casurina pole of 10 feet height including loading and unloading charges transportation stacking of sapling at site earth work excavation of required size planting of sapling refilling of excavated earth etc.., directed by the site in charge.

Supply of different designs of dustbins made of six layer bonding of glass fibre such as Fish Dustbin (2.75 Ft ht), Rabbit Dustbin (2.75 Ft ht), Monkey Dustbin (2.75 Ft ht), Cartoon Duck Dustbin (3.25 Ft ht), and Penguin Dustbin (2.75 Ft ht), including material cost conveyance charges as per the specifications directed by the department officers