Municipal Administration And Water Supply Department Tender

Supply & Delivery and fixing of 1000 LiterHDPE tank as per IS 12701 / 1996 including Loading, unloading,transportation and labour charges fro fixing of GI pipes and specials for pipe connection works including cutting threading and fixing charges etc., as per standard specifications.(2023-24 TWAD SOR Page No 89 Sl.No 17.0)

Supply & Delivery of single phase 1.5 Hp Submersible Motor with out panel board 15LPMx90m with ISI Mark As Per IS 8034/2002 without Panel board including cost of all labour charges etc., complete as per standard specifications. (2023-24TWAD SOR Page No 100 Sl.No 2.0 )

Labour charges for the erection of submersible pumpset in bore well/open well including fixing and jointing submersiblecable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps,pressure gauges upto the exterior wall of pumproom and erection of panel board consisting of TPICN switches starter,Voltmeter,Ammeter,threepilot (indicating) lamp scapacitor single phasing preventor,water level guard and laying and jointing the cables and twin earthing as per IErules etc.,complete and testing the pumpset and trail run for 10 days. 7.50 HP Open well Motar.(2023-24 TWAD SOR Page No 308 Sl.No 17c)

SINGLE PHASE PANEL BOARD WITH TWO LEVEL GUARD AND AUTO START 1.50 HP Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).(2023-24 TWAD SOR Page No 114 Sl.No 11.1)

Supply and Run of 2.5sq.mm 3 core flat type copper cable confirming to IS 694 / 1990 including all cost etc., complete as per standard specifications.(2023-24 TWAD SOR Page No 120 Sl.No 12.1 )

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering, and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed depositing the surplus excavated soil with in the compound in places shown by the departmental officers with intial lead and lifts and cleaning and levelling the site etc.,complete.

Cement concrete 1:4:8 (One cement, four sand and eight hard broken stone) using 40mm gauge broken jelly for foundation etc., including dewatering wherever necessary laid in layers not more than 15 CM thick etc., compacting, curing complete complying with standard specifications.

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Brick work in CM 1:5 (one cement & five sand) using II nd class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing,etc., complete complying with standard specification

Plastering with cement mortar 1:5mix (One cement and five sand) using 12 mm thick including cost and conveyance of all materials and all labour charges etc., complete as per standard specification.

Supply & Delivery of PVC Pipe & specials etc., complete (a) 32mm dia UPVC Column pipe (2023-24TWAD SOR Page No 22 Sl.No 1.3)

Nylone Robe for Borewell (2023-24 PWD SOR P No 112 Sl.No M1072)

200 mm dia Bore cover

Bore clamp set

32mm dia (1 1/4" ) GI Pipe (Medium) As per 1239/Part I /90 (2023-24TWAD SOR Page No 40 Sl.No 5.0)

32mm dia (1 1/4" ) GI Adopter As per 1239/Part I /90

32mm dia (1 1/4" ) GI Hex Nipple (2023-24 TWAD SOR Page No 44 Sl.No 5.1b)

32mm dia (1 1/4" ) GI Union (2023-24 TWAD SOR Page No 44 Sl.No 5.1b)

32mm dia (1 1/4" ) GI Tee (2023-24 TWAD SOR Page No 44 Sl.No 5.1b)

32mm dia (1 1/4" ) GI Coupling (2023-24 TWAD SOR Page No 44 Sl.No 5.1b)

32mm dia (1 1/4" ) GI Elbow (2023-24 TWAD SOR Page No 44 Sl.No 5.1b)

32mm dia (1 1/4" ) GM Gate valve (2023-24 TWAD SOR P No 45 SI NO 5.2)

Sintex tank Nipple

25mm dia (1" ) GI Hex Nipple (2023-24 TWAD SOR P No 44 SI NO 5.1b)

25mm dia (1" ) GI Union (2023-24 TWAD SOR P No 44 SI NO 5.1b)

25mm dia (1" ) GI 1 Nipple

25mm dia (1" ) GI 9" Nipple

25mm dia (1" ) GI 6" Nipple

25mm dia (1" ) GI Tee (2023-24 TWAD SOR P No 44 SI NO 5.1b)

20mmx 15mm (1"x1/2") dia (1" ) GI Reducing Elbow (2023-24 PWD SOR P No 47 SI NO G iv)

15mm dia (1/2" ) GI Hex Nipple (2023-24 PWD SOR P No 48 SI NO I v)

PVC Screw Down Tap Heavy Type 15mm dia (2023-24 TWAD SOR P No 153 SI No 161)

25mm dia GI Bend (2023-24 TWAD SOR P No 44 SI NO 5.1b)

25mm dia GI Coupling (2023-24 TWAD SOR P No 44 SI NO 5.1b)

25mm dia GI Hex Nipple (2023-24 TWAD SOR Page No 44 Sl.No 5.1b)

Supply & Delivery of 32 Amps Porcelain fuse unit (500 V) including all cost etc., complete. (2023-24 TWAD SOR Page No 199 Sl.No 6b)

Supply & Delivery of 32 Amps three phase 500 V 4 pole Change over switchincluding all charges etc., complete as per standard specifications. (2023-24 TWAD SOR Page No 200 Sl.No 9b)

supply & fixing of metre board including cost and conveyance of all materials and all labour charges etc.,

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,(2023-24 TWAD SOR Page No 89 Sl.No 18.0)

EB Registration & service charges etc., complete

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 (a) For Sides

For Slab

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Supply and Delivery of 200 mm dia 6Ksc PVC Pipe including cost and conveyance and all labour charges etc., complete (a) 200mm dia PVC 6Ksc Pipe (2023-24 TWAD SOR P No 19 Sl.No 1.0 II )

Lowering the 200 mm dia 6Ksc PVC Pipe including cost and conveyance and all labour charges etc., complete. (a) 200mm dia PVC 6Ksc Pipe (2023-24TWAD SOR P No 280 Sl.No 11bii)

Refilling the excavated Earth soil as per Standard Specification etc., complete.(2023-24 TWAD SOR P No 298 Sl.No 19b)

Supply and fixing of RCC Man hole collar with cover slab including cost and conveyance of all materials and all labour charges etc., complete as per standard specification.