Municipal Administration And Water Supply Department Tender

Plastering in Cement Mortar 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

Plastering in Cement Mortar 1:4 Mix (one cement, four sand) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Supply and delivery of following GI Specials with ISI mark including cost and conveyance of all materials etc., completed.20mm G.I Hex Nipple

40mm dia G.I Hex Nipple

40mm dia G.M gate valve with ISI mark

Supply and fixing in positon 15mm dia brass/c.p screw dome tap /pillar /Swan neck tap "(heavy duty) of approved make conforing to I.S Specification and quality including cost and conveyance etc complete

Supply and delivery of following PVC 6 KSc pipes with ISI mark including transporting the same to the site directed by the departmental officers etc complete as standard specifications 25mm dia PVC Pipe (10KSC)

40mm dia PVC Pipe (10KSC)

110mm dia PVC Pipe

32mm UPVC pipe

Supply and delivery of following PVC 6 KSc Specials with ISI mark including transporting the same to the site directed by the departmental officers etc complete as standard specifications 25mm PVC Equal Tee

40mm dia PVC Equal Tee

25mm Dia PVC Elbow

40mm dia PVC Elbow

110mm dia PVC Elbow

25mm PVC coupling

40mm Dia PVC Coupling

Supply and delivery and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including, cutting, threading and fixing charges etc., as Specification. 1000Litre HDPE Tank

Supplying and fixing over the floors best quality of Design ceramic tiles of 30.5 c.m x 30.5c.m x 6mm size of approved colour laying with cement mortor 1:2 mix pointing the joints with colour pigments etc. Complete.

Supplying and fixing in Position of Indian Oriya type colour water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

Supplying and fixing RCC Pre cast slab in RCC 1:1½:3 mix including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supply and fixing of 18W 4 Feet LED Light Fitting complete with copper choke and condensor with TW round block on wall or ceilling with flu tube with PVC unsheathed Copper leads from terminal to the fitting etc.

Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and thick TW switch box and 5A F.T.switch with painting of suitable colour for open PVC light point.

Supply,Delivery and Fixing of Following 3 Core Flattype Copper Cable Conforming to IS 694/1990 including Transporation charges etc complete.,

Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted (20*100) LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230V+/- 10%, 50 HZ +/-5%

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supply and fixing of following Electrical materials including cost and conveyance of all materials and labour charges etc., completed.TW Plank of size 600mmx450mmx19mm with supporting reepers of 1" thick on both side with painting and with bolt,nut and washer etc., completed.

Supply and fixing of 16amps porcelain fuse Unit (500V)

16Amps DP Switch with metal clad (side handle)

Supply and run of 2 of 4 Sq.mm (56/0.3) PVC insulated SC unsheathed Cu conductor of 1100 V on 7/20 GI bearer wire for service connection mains.

Supply and run of 2 x 4 Sq.mm (56/0.3) PVC insulated SC unsheathed cu conductor of 1100 V grade in 25 mm dia GI pipe (class B) suitably bent at both ends with necessary angle iron upright and end supports for mains (service pipe)

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

32mm Pipe