Municipal Administration And Water Supply Department Tender

Supplying and fixing of 92mm X 92mm X 1m height wooden pegs in Babool wood (vachelia nilotica) (no. of pegs - 1000) including necessary treatment including Kiln seasoning as per standards, anti termite protection and oil treatment/ epoxy exterior quality paint. cost including wooden joinery as per architect's specification, labour, transportation,lining, SS screws, etc. complete

Supplying and fixing of 92mm X 92mm X 1.5m height wooden pegs in Babool wood (vachelia nilotica) (no. of pegs - 115) including necessary treatment including Kiln seasoning as per standards, anti termite protection and oil treatment/ epoxy exterior quality paint. cost including wooden joinery as per architect's specification, labour, transportation,lining, SS screws, etc. complete

Timber Framework

Supplying and fixing of runners 92mm X 65mm - 2138 M - Red Maranti (high density) or Nellarai wood or Babool wood (vachelia nilotica) including necessary treatment, Kiln seasoning as per standards, anti termite protection and oil treatment/ epoxy exterior quality paint. cost including wooden joinery as per architect's specification, labour, transportation,lining, SS screws, etc. complete

Supplying and fixing of side bracing 120mm x 30mm - 538M. in Red Maranti (high density) or Nellarai wood or Babool wood (vachelia nilotica) including necessary treatment, Kiln seasoning as per standards, anti termite protection and epoxy exterior quality paint. cost including wooden joinery as per architect's specification, labour, transportation,lining, SS screws, etc. complete.

Decking

Supplying and fixing Brazilian IPE wood – walkway decking, IPE wood plank dimension – 65mm -115mm (90mm) width x 19mm (+\- 1mm) thick random length 1000 - 2000 mm. Fixing the decking including labor charges, L cleat or SS screws and necessary treatment as per standards, anti termite protection and oil coating. cost including grooves, labour, transportation , etc. complete. FFL of decking to be flushed with sand level as per architect's specifications.

Railing

Supplying and fixing of timber balustrade 50mm x 50mm X 1100mm in Babool wood (vachelia nilotica) including necessary treatment including Kiln seasoning as per standards, anti termite protection and epoxy exterior quality paint. cost including wooden joinery as per architect's specification, labour, transportation,lining, SS screws, etc. complete.

Supplying and fixing Wood Plastic Composite (WPC) horizontal railing members at 860mm height from decking floor level; Dimension: 0.07m width X 0.04m height including labour, cost of screws, transportation, necessary treatment, etc. complete (Total length - 538M) 2.90 Mt/length.

Supplying and fixing WPC horizontal railing members at 630mm height from decking floor level; Dimension: 0.02m width X 0.075m height including labour, cost of screws, transportation, necessary treatment, etc. complete - first level side border (Total length - 538M) 2.44 Mt/length

Supplying and fixing WPC horizontal railing members at 80mm height from decking floor level; Dimension: 0.02m width X 0.075m height including labour, cost of screws, transportation, necessary treatment, etc. complete - second level side border (Total length - 538M) 2.44 Mt/length

Sectioning and levelling

Refilling with existing earth in regular layers of 150mm thick including watering and consoildation by Earth rammer etc., complete

Markings & Signage

Providing And Laying of Hot Applied Thermoplastic Compound 2.5 mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness of 2.5 mm Is Exclusive of Surface Applied Glass Beads As Per Irc:35 The Finished Surface To Be Level Uniform And Free From Streaks And Holes Etc Completed As Per Mort& H Specification No.803

Providing And Fixing Reflective Road Studs of Category a Raised Pavement Markers Made Out of Poly Carbonate / Methyl Methecrylate /Abs Moulded Body Conforming to astm D 788 And Reflective Panels With Micro Prismatic Lens Capable of Providing Total Internal Reflection of The Light Entering The Lens Face With Retro Reflectance And Chromaticity Values Conforming to astm D4280. The Reflective Raised Pavement Markers Shall Also Confirm To The Morth Circular No Rw/Nh. 33023/10/97- Do.Iii Dt 11.06.97. The Height, Width And Length Shall Not Be Less Than 15mm, 90mm And 100mm And With Minimum Reflection Area of 13 Sq.m On Each Side And The Slope To The Base Shall Be 35+/-5Degree Each Reflectors Shall Have A Cil Not Less Than Values Specified In Table 2 of Said Morth Circular. The Strength of Deteachment of The Integrated Cylindrical Shanks, (of Diameter Not Less Than 19+/-2mm And Height Not Less Than 30+/-2mm) From The Body Is To Be A Minimum Value of 500Kgf. Fixing Will Be By Drilling Holes On The Road For The Shanks to Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per Manufacturer’S Recommendation And Complete As Directed By The Engineer.The Marker Shall Support a Load of 13635Kg Tested In Accordance With

Providing And Fixing of Retro Refelctorised Cautionary, 60 cm X 60 cm Square Mandatory And Informatory Signs (With Definition Board) Made Out of High Intensity Prismatic Grade Sheeting Conforming To Type – Iv Standards of Irc 67 .2012 And Astm D 4956 – 09, Specification And Fixed Over 2mm ThickAluminium Sheet Fixed Over A Back Supporting Frame of 25mm X 25mmx3mm.Mild Steel Angel And Supported on a Mild Steel Angel Post 75X75X6mm WithA Clear Height of Not Less Than 2.10M From The Ground Level to TheBottom of The Sign Board And 0.60M Below Ground Level. The Sign PostShould Be Painted As Per Irc 67- 2012 And Firmly Fixed To The Ground ByMeans of Properly Designed Foundation With M15 Grade Cement Concrete45cmx45cmx60cm Size Including Cost And Conveyance of All Materials,Equipment, Machinery And Labour With All Leads And Lifts, Loading ChargesNecessary For Satisfactory Completion of The Work As Directed By The Engineer In Charge. High Intensity Retro – Reflection Sheet Shall Consist of Minimum Coefficient of Retro Reflection As Per Table 6.6 of Irc 67:2012. The Retro Reflection Sheeting Shall Be Covered Under 7 Years Warranty Issued For Field Performance And a Certified Copy of Three Years Outdoor Exposure Report

Providing And Erecting Direction And Place Identification Retro Refelctorised Signs Having Area More Than 0.9Sq.m– Type Xi Made Out of High Intensity Prismatic Grade Sheeting Conforming To Type Xi Standards of Irc 67 . 2012 And Astm D 4956 – 09, Specification And Fixed Over 2mm Thick Aluminium Sheet Fixed Over A Back Supporting Frame of 25mm X 25mmx3mm. Mild Steel Angel And Supported On A Mild Steel Angel Post 75X75X6mm With A Clear Height of Not Less Than 2.10M From The Ground Level To The Bottom of The Sign Board And 0.60M Below Ground Level. The Sign Post Should Be Painted As Per Irc 67-2012 And Firmly Fixed To The Ground By Means of Properly Designed Foundation With M15 Grade Cement Concrete 45cmx45cmx60cm Size Including Cost And Conveyance of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion of The Work As Directed By The Engineer In Charge. High Intensity Retro –

For GST 18%