Municipal Administration And Water Supply Department Tender

Plain Cement concrete 1:2:4 [one cement, two M-sand and four course aggregates] using 20mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification.

Supplying and erecting centering for soffits of plane surfaces like RCC Slabs, Lintels, Sunshades, Square Columns, Staircase waists, Beams etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm and BG 10 stiffened with M.S angles of size 25mm x 25mm x 3mm laid over silver Oak (C.W) joists of size 10cm x 6.5cm (spaced at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia (spaced of 75cm c/c), including cost of material, labour, HOM of machinery etc., complete complying with standard specification.

Supplying, fabricating and placing in position of Steel Reinforcement using Ribbed tor steel rods, for all RCC works as per the design given by the departmental officers including cost of steel and binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete as per Standard Specification

Providing and laying in position standardised concrete mix M-20 Grade in accordance with IS 456-2000 using 20mm and down graded hard broken jelly for all RCC items of works with minimum cement content of 325kg/cum and maximum water cement ratio of 0.50 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without impairing strength and durability with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.30cum) 5156kg of 10-12 mm machine crushed stone jelly and with about (4.79 cum) 7760 kg of M-sand, but excluding cost of reinforcement grill and fabricating charges cantering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing etc and providing fixtures like fan clamps in the RCC floor / Roof slabs wherever necessary without claiming extra cost including cost of material, labour, HOM of machinery, etc., complete complying with standard specification and directed by the departmental officers - The Coarse and fine aggregates to be used should comply with the requirements of IS standards.

Plastering with cement mortar 1:4 mix, 20mm thick in all floors using clean screened P-sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification.

Conveyance of excavated earth to a lead of 0 to 5 Km, lowering and laying in low lying areas , transporting and unloading and inluding cost of all labour charges etc., complete as per standard specification

Add G.S.T. @ 18%