Municipal Administration And Water Supply Department Tender

Supplying and erecting Shuttering, necessary supports for plain surfaces such as reinforced cement concrete for plinth beam including decentering after curing period, complete complying with standard specifications at all leads inside the building etc complete..,

Reinforced Cement Concrete M20 (Mix 1:1 1/2:3, one part of cement, one and half parts of sand , three parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications at all leads inside the building etc complete.,

Supply and Fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening, cleaning, cutting, bending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in position and providing necessary cover blocks for all works as per detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts.

Flyash brick work in cement mortar 1:5 (one part of cement and five parts of sand by volume) for superstructure, entrance & staircase steps etc., using first class table mould chamber burnt bricks of crushing strength 40kg/sq cm (minimum) & water absorption should be less than 20%, including scaffolding, soaking of bricks, raking of joints, hacking of concrete surfaces coming in contact with brickwork, curing etc.,complete complying with relevant standard specifications, at all leads

Plastering with cement mortar 1:5 (One part of cement, five parts of P sand by volume) for 12 mm thickness (average), for all internal/external slabs at/slopped/hipped/canopy), sunshades, table top & rack slabs, trenches etc., finished smoothly to one level including hacking concrete surfaces, scaffolding, curing etc., complete, at all leads.

Supplying and fixing of using M.S doors and windows ,all fixtures,and labour charges etc., complete as per the standard specification and the instruction of the departmental officers etc complete.

Wiring with 2*1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe conceited in wall and ceiling with PVC accessories in flush with wall with 3mm thick phylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable color for PVC conereated light/Fan Point (For electronic regulator) SD24

Wiring with 2*1sqmm (56/03) PVC insulated SC unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm*100mm*113mm TW switch box with 3mm thick xylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire, and making good of the concealed portion with suitable color for concealed PVC plug point. SD38.

Wiring with 2*1sqmm (56/03) PVC insulated SC unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm*100mm*113mm TW switch box with 3mm thick xylem sheet cover for 15 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire, and making good of the concealed portion with suitable color for concealed PVC WIRING

Supply, install, test and commission interior 20W LED Tube Light for T8 Fitting (Single Side) as per the direction of dept. officers ect complete.

Supply and fixing of 1200mm (48") AC Ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp SD 107 PWD Electrical Data

Supply and fixing of 450mm Sweep wall mounting fan complete with complete accessories M1356 as per PWD std specifications

Supplying and errection of indoor luminaries suface mounted lights 18W LED 3000K Round Type Recessed Fitting with LED, die cast construction and UV stabilized polycarbonate diffuser luminaires of Philips/Osram make for ceiling including provision of suitable accessoreis all complete as per specification and direction of departmental officers M-1289

Supplying and fixing with Polycarbonate Sheet 6mm thick including necessary bolt, nuts and bitumen washed etc., completed

Supplying and fixing of Stainless Steel Sink of size 1200 x 550 x 180mm as directed by the departmental officers etc complete

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates, square and rectangular tubes and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc,complete as per standard specification

Fabricating supplying and fixing of Pre Painted Galvanium Iron Sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Providing rain water harvesting structure by supplying and fixing Precast Reinforced Cement Concrete detachable inter locking pipes (Ring) of 1.20m dia sizes in RCC M20 concrete using following HBGS jelly including cost of reinforcement steel in position, cost of moulding charges, casting of cover slab, filling with brick bats and lime stone,finishing, curing and fixing in position, loading and unloading & transport etc., complete complying with standard specification and as directed.

Plastering with cement mortar 1:3 (One part of cement, three parts of P sand by volume) for 20 mm thickness (average), for all internal/external slabs at/slopped/hipped/canopy), sunshades, table top & rack slabs, trenches etc., finished smoothly to one level including hacking concrete surfaces, scaffolding, curing etc., complete, at all leads.

Painting with Plastic Emulsion Paint of two coats over primer coat from ISI make for internal walls including cost of material and labour charges etc. complete as per the standard specifications and the instructions of the departmental officers ect complete.

Supply and delivery of 2 Hp capacity submercible pumpset and fixing of including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,complete as per standard specification.

Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5m etc, complete as per standard specifications SD.75

Supply and laying of 3 core 10 sq.mm. of Armoured Copper Cables for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT. M-0824

Supplying and fixing of Stainless Steel Sink of size 1200 x 550 x 180mm as directed by the departmental officers etc complete

Manufacturing, Supplying and Fixing of Stainless Steel Gate/Hand rails for staircase using 40mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Dismantling the old damaged brick work in cement mortar etc complete

Dismantling the old damaged RCC slab in cement mortar etc complete