Municipal Administration And Water Supply Department Tender

Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications

Providing and laying 50mm compacted thick Dence bituminous macadam using 0.35 cum of 26.5-13.2 mm graded metal and 0.21 cum of 13.2-2.36 mm graded metal and 0.14 cumof 2.36 mm and below metal with 24 kgs of cement and 46 kgs of 60/70 bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and agregates to required temperature and mixing them in required temperature in central hot mix plant by the hot mix plant 20-30 tonnes capacity conveying the mix by tempper tracks to paver site, Sprating the mix in required temperature for uniform thickness of 50mm with mechnical paver to the specified grades and cross section and compaction by 80 - 100 kl power roller to the required dencity etc., including hire charges and fuel charges for 20 - 30t CMP with bitumen boiler,tipper, paver finisher, power rollers and all other tools and plants required, including all other incidental charges etc., complete using C M P clause 507 of MORTH spefications.

Providing and laying bituminous concrete to 30mm thick using 0.13 cu.m of 19.00-9.50mm graded metal 0.17 cu.m of 9.50-2.36mm graded metal and 0.26 cu.m of 2.36mm & below metal by adding the shredded plastic waste over the aggregate heated to 170 degree celcious in the central hot mix plant, mixed well with 45.27 kgs of hot bitumen VG 30 Bitumen (160 degree celcious) 60/ 70 grade for premixing per 10 sqm to lay 30mm compacted thick of bituminious concrete including the cost materials ( the cost of Municipality / Corporetion Plastic Waste obainted by the contractor from the Municipality / Corporation will be Recovered) and conveyence of all materials to C M P site, heating the bitumen and agregates to the required temperature and mixing the minimum required Temperature in central hot mix plant 20 - 30 tonnes capacity conveyeing the mix by tipper trucks to paver site, spreading the mix in requires temereature for uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory/Pneumatic Roller to the required density etc., including labour for loading bitumen in to bitumen tank and metal to feeder unit, labour for attending to paver to site etc., including hite charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory/Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH revision 5