Municipal Administration And Water Supply Department Tender

Dismantling and Removing the existing damaged cement concrete works including all cost etc complete.

Cement concrete 1:4:8 (one cement, foure sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specification

Brick work in c.m.1:5 mix using second class table moulded bricks including all cost etc complete.

Providing centering for R.C.C slabs & beams using M.S.Sheet sides and soffits including all cost and conveyance etc complete

Supplying and fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening, cleaning,cutting,ending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in position and providing necessary cover blocks for all works as per detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts.

Reinforced Cement Concrete M20 (Mix 1:1 1/2:3, one part of cement, one and half parts of sand , three parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications.

Plastering for RCC exposed surfaces, such as sunshade, beam, Roof ceiling, plastering 1:3 to 10mm thick inclding all cost etc complete.

Plastering for concrete surfaces using cement mortar 1:5(One part of cement, five parts of sand by volume) thickness 12 mm (average) for all internal/external surfaces for drains etc., finished smoothly to one level including curing etc., complete, at all leads and at all heights

Supply and providing false ceiling arrangements using 12.5 mm tk tapered edge Gypsm Board False ceiling confirming to IS 2095 including providing and fixing of frame work made up of special sections power pressed from MS Sheet and Galvanised Zinc Coating 600 micron as per IS 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm tk.with flanges of 12 mm and 37 mm providing and fixing at all height false ceiling of at 1200 mm c/c on flanges to the ceiling with dash fastener 12.5 mm dia x 40 mm long with 6 mm dia bolts to the hanger of 25 mm x 25 mm 5mm of required length and other end of angle hanger being fixed with nuts and bolts to G.I. Channels 45 mm x 15 mm x 0.90 mm running at the rate of 1200 mm c/c to which the ceiling section 0.5 mm tk. bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 at 450 mm c/c shall be fixed in a direction perpendicular to G.I Channel with connected clips made out of 2.64 mm dia x 230 mm long G.I.Wire at every junction including fixing the gypsm board with ceiling section and perimeter channels5 mm tk. 27 mm high having flanges of 20 mm and 30 mm long,theperimeter of ceiling fixed to wall /partitions with the help of rawl plugs at 450 mm c/c with 25 mm long drive -all screws at 230 mm intervals including jointing and fixing to a flush finish of tapered and square edges of the Gupsum Board with recommented filler,paper tapes,Finisher and twp coats of primer suitable for Gypsum Board as per manufactures specification and also including the cost of making openings for light fitting ,Grills Diffusers,cutouts made with frame of perimeter channels suitably fixed all complete as per drawings and specification and direction of th departmental officers .(excluding cost of paintnig)

Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete

Providing interior design Printed PVC Wall panels on walls over the frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side Vinyl sheet will be sticked over the plywood using fevical and finishing , the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, Vinyl paper and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete

Daddoing the walls with first quality approved Colour Glazed Elevation tiles with printed design of size 450X300X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete

Floor Finish with Ornamental design double charged Digital Printing Floor tiles 60 X 60 cm of approved brand and colour in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification

Flooring finishing with first quality Design Ceramic Tiles of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete

Paving the floor with Granite Slab(super fine polished withmachine cutedges) of sizes1.2mx 0.60m and above of 18mm to 20mm thickness in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 25mm thick and white cement slurly layer of 3mm thick over this, laid insituand pointedwith whitecement neatlyand fixedin positionso asto makeperfectly smoothand shining to the alignment including cutting the marble slab to size with machine cutting polishing using different grade of corporandum stone, oxalic acid, tin oxide etc., and including hire charges or polishing machinery etc., complete

Supply and fixing of Doors Using 32mm flush door,1mm laminate on either sides, First quality Teak wood trimmings, Brass Oxidized hinges, Tower bolt,Lock,Handle,Door stopper, with Door closer Teak wood surface is stained and finished in semi glossy melamine etc, complete as per standard specifications

Supply and fixing Solid panel P.V.C door with frame and shutters including all accessories and locking arrangements etc complete

Supply of U-Pvc Casement Window at site by using with U-Pvc Profile JP 017 (58mm x 60mm 1.00 kg/m) for the outer frame .Total breadth is being divided equally in to two three or four openings (as per drawing).By using U-Pvc Profile JP 015 (78mm x 60mm 1.15 kg/m) for the shutters and the Mullion use U-Pvc Profile JP 019 (72mm x 60mm 1.20kg/m) and completed by fusion welding. All the shutters are fitted with 5mm clear glass with suitable U-Pvc glass bead. The windows are properly fitted with imported quality handles,SS 304 grade steel friction hings & Espengnett. use EPDM Material as gasket. All the profile are Reinforcement with 1.2mm GI Steel. Imported Anchor Fastners are being used to fix in the wall and fill with imported White sealant.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and fixing of European water Closet (One Piece closet) with P-Trap and Slim Duraplast Seat Cover of Size : 645x355x675 mm with fittings and brackets dismantling and redoing the masonry complete. including all cost etc complete.

Supplying and fixing of Under Counter wash basin (Round) of 44 cm dia including cost of frames and fittings ,dismantling and redoing the masonry complete. including all cost etc complete.

Supplying and fixing vitreous china wash basin with CI/ MS brackets, 15mm CP brass pillar taps, 32mm CP brass waste of standard pattern, 15m PVC inlet connections and 15mm CP angle valve including painting of fittings and brackets, cutting and making good the walls wherever required:

Supply of approved brand Sanitary Fittings and accessories including all cost etc complete

Waste Coupling

Angle valve

Single Lever Basin Mixer Tap with Provision for Hot and Cold Water

100 mm Round shape Single Flow Hand shower

1/2 " Chrome Finish Brass pillar cock

Chrome Finish Wall mounted Long Round Sliding Rail of size 24 mm & 600 mm

1/2" Chrome Finish Long Neck Pillar Cock

300 x 190 mm Bottle Trap

Urinal Waste Coupling (concealed)

Urinal Valve Auto Closing System with Built-in Control Cock with Wall

Wall Mount Installation Type , Hand Shower Health Faucet

Supply and run of 3 of 4sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable flexible conduit pipe on wall and ceiling with continuous earthwire connectin of 14SWGTC wire with painting painting of suitable colour

Supply and run of 3 of 2.50 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable flexible conduit pipe on wall and ceiling with continuous earthwire connectin of 14SWGTC wire with painting painting of suitable colour

Supply and run of 4 of 2.50 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable flexible conduit pipe on wall and ceiling with continuous earthwire connectin of 14SWGTC wire with painting painting of suitable colour

Supply and run of 6 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth Wireconnection of 14SGTC wire with painting of suitable colour

Supply and run of 6 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth Wireconnection of 14SGTC wire with painting of suitable colour

Supply, installation and termination of Data points and LNA cabling and other required CAT6 UTP cables and Optical fiber cables along with accessories as per instruction of departmental officers including all cost etc complete.

Supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40 A 4 pole MCB isolater as in coming and 12 Nos . 6A to 32 ASP MCB as out going in flush with wall and making good of the concealed portion with earth connection.The MCB DB and MCB's should be with the ISI mark (like standard make

Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessorie in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A switch with continous earth wire connection of SWGTC wire for making good of the concealed portion with suitable colour for PVC Concealed light/Fan Point (For electronic regulator) (5 Points per coil) (SD 23)

Supply and Fixing of 15 watts 7" LED Surface Panel light fittings with Led bulb of ISI made with standard specification including all cost etc; complete

Supply and Fixing of 24 watts 9" LED Panel light fittings with Led bulb of ISI made with standard specification including all cost etc; complete

Supply & Installation of 5 Star Rated 1.5 TR Split Type AC Unit Inverter with Copper coil(AIR-CONDITIONER ) and All accessories etc, complete as per standard specifications

Supply and fixing of Wall Mounted Air Circulator - Wall 24" Fan with Double ball-bearing 900 oscillation Sturdy close-mesh guard beautifull design and Powerful heavy-duty motor . etc, complete as per standard specifications

Supply and fixing of 24" Pedestal Fan with Double ball-bearing 900 oscillation Sturdy close-mesh guard and Powerful heavy-duty motor . etc, complete as per standard specifications

Supply and fixing of 230mm (9") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall including all cost etc complete.

Wiring with 2x1.5sq.mm (22/3.0) PVC insulated unsheathed single core unsheathed copper Conductorcable of 1100V grade in suitable heavy gauge PVC rigid pipe on wall and ceiling with PVC accessories inflush with wall with 150mm x 100mm x 113mm TW swith box inflush with wall 3mm thick hylum sheet cover for 5A 3pin non interlocking wallhylem sheet cover for 5A flush type switch with painting of suitable colour for continous earth wire connection of 14 SWG TC wire for open PVC plug point

Wiring with 2x4 sqmm(56/0.3) PVC insulated SC unsheathed Cu.conductor of 1100V grade in suitable Pipe on wall and celling with PVC accessories with 150mmx100mmx113mm TW switch box for 15 A 3 pin non inter locking CS plug with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC power plug point.

Supply and fixing of 22 watts LED Tube Light Fittings complete with copper choke and condensor with TW round blocks on wall or ceiling with LED tube with PVC unsheathed copper leads from terminals to the fitting including all cost etc complete.

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") including all cost etc complete.

Supply and fixing of WT Bulkhead fittings with guard suitable for incandescent lamp with 20 watts CFL bulb including all cost etc complete..

Painting the Wall Two Coats with approved colour Emulsion paint two coats over One Coat of primer over Cement Plastered Wall surfaces etc., complete complying with standard specifications and as directed by the departmental officers.

Painting with Two Coats of approved colour Enemal paint over One Coat of primer over the New iron doors and gates surfaces etc., complete complying with standard specifications and as directed by the departmental officers.

GST add 12 %