Municipal Administration And Water Supply Department Tender

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) sd-18

Supply and fixing of 20W 4 Feet LED Fitting including all labour charges and etc completed

Supply and fixing of 60 watts LED street light outdoor fitting including all labour charges etc completed

Supply and delivery and fixing of 1000 liters Capacity HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supply and delivery of following GI Pipes (Medium) B Class with Specials with ISI mark including cost and conveyance of all materials etc., complete complying with standard specification. 40mm GI Pipe

40mm GI Coupling

40mm GI Elbow plain

40mm GI H Nipple

40mm GI Tee

40mm GI Union

40mm GM Gatevalve

40mm GM NRV

40mm x 20mm GI Reducer Tee

20mm GI Pipe

20mm GI Elbow

20mm GI Coupling

20mm G.I Tee

110mm pvc pipe

110mm pvc elbow

110mm pvc Bend

Towards the labour charges for cutting and threading for GI Pipes etc., Completed 40mm dia GI Pipe

20mm dia GI Pipe Cutting

40mm dia GI Pipe Threading

20mm dia GI Pipe Threading

Laying and Jointing the GI Pipes and Specials including all Labour Charges etc completed For GI Pipe

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309)

supply and fixing of Incinerator machine including all transportaion charges and all labour charges etc completed( Thickness of thermal Insulation material (mm)25 millimeter Thickness of MS/SS sheet of burning chamber (internal) (mm) (Min) 3 millimeterMachine Weight(kg)51-250Thickness of door including insulation (mm)25 millimeterFlexible emission Outlet pipe dia (mm) 40 millimeterMaterial of Housing cabinet (External) Mild Steel(CRCA) sheetMaterial of Burning chamber (Internal) Mild Steel(CRCA) sheet Material of Thermal Insulation High Density Ceramic Board Temperature indicator provided Minimum Burning temperature (degree C)800Burning Capacity at a time (Number of Napkins) 26-50Burning time of full capacity Napkins/pads (minutes) (Max) 20 minute Automatic digital controller for time Automatic digital controller for temperatureType of SCU (Smoke Control Unit) Separate unit Material of housing of Smoke Control Unit (SCU) Mild Steel(CRCA) cabinet Both carbon Control and Foul odour Control Chambers for filteration of smoke emission Number of filters in Carbon control chamberType of filters in Carbon control chamber Activated Carbon filter Number of filters in Odour control chamber Blower RPM1800Warranty in Years (Option of comprehensive warranty is available through bidding only, which if opted will supersede normal warranty in the catalogue)

GST-18%