Municipal Administration And Water Supply Department Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Municipal Administration And Water Supply Department - MAWS Tender
Civil And Construction
Solid Waste Management
Building Construction
Transportation and Logistics
Eprocure
Opening Date24 Oct 2024
Closing Soon25 Nov 2024
Tender Amount₹ 9,98,88,000
Costs
EMD
₹ 9,98,880Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Transfer Station For Coimbatore Corporation At The Location Near Kavundampalayam With A Capacity Of 200 Tpd
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MAWS_496508_3Tender No
e43/2024 (Two Cover)Tender Authority
Municipal Administration And Water Supply Department ViewPurchaser Address
-Website
http://https://www.tn.gov.in/maws/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Earth Work excavation for foundation In hard stiff clay, stiff black cotton, hard red earth,shales murram, gravel , stoney earth and earth mixed with small size boulders and sand ,silt or other loose soil, wet sand etc., complete
2102.11
-
-
supplying and filling in foundation and basement with well gravel in alyers of not more than 15 cm thick well rammed watered and compacted etc., complete complying with standard specification
485.41
-
-
Anti-termite treatment to the outside of foundation with chemical emulsion by admixing Imidaclaprid emulsifiable concentrate (62 ml in 28.5 litres ) with water by weight, drilling 12mm. dia holes in concrete or masonry apron at an interval of 300mm. to a depth, of 300mm or more as close to the plinth wall as possible and the chemical emulsion pumped into those holes to soak the soil below at a rate of 2.25 litres per linear metre complete as per specification laid down in para 4.3.1.1 of Code I.S.-6313 (Part-III)-1981.
2241.33
-
-
Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
43
-
-
Poviding and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -
127
-
-
Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers
291.79
-
-
Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.
296
-
-
Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900
296
-
-
Vibrated cement concrete of grade M35 above (Design mix) using 20mm and below HBG metal including cost and conveyance of all materials to site and cost of cement excluding cost and fabrication of steel but including cost of form work(centering,shuttering), labour charges for mixing, transporting, laying and curing concrete, working at heights, hire charges for tools and plants including all other incidental charges etc., complete
494
-
-
Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.
49000
-
-
Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification
26000
-
-
Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.
2701
-
-
FORM WORK: Providing making, erecting and fixing in position the formwork in true line and level either in plywood or steel plates including strutting , staging, proping, bracing and making the joints leak proof , providing chamfers an edges of columns, striking and eoving the same on maturity of concrete etc., complete with all tools, materials and labour. The cost of formwork shall include all nuts, bolts, nails, clamps etc., for beam, column, footing, slab weigh bridge room, sump
-
-
-
For Vertical Wall - plain surface
132.74
-
-
For Column
102.26
-
-
For Grade Beam / Plinth Beam
339
-
-
For Roof Beam /Slab , Lintel Beam
210.4
-
-
Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification
188
-
-
Supplying and fixing in AC Exhaust Fan 450mm(18") Sweep (Heavy Duty) with all connections etc, as per standard specification
6
-
-
Supply and fixing of M.S Gates with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.
2800
-
-
Brick work in CM 1:5 (one cement & five sand) using Flyash Brick of size 230 X110 X 75mm including finishing, curing, etc., complete complying with standard specification - 100CFT
92
-
-
Brick Partition Walls using Flyash Brick of size 230 X110 X 75mm in C.M 1:3 using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm
33
-
-
Random rubble masonry in cement motor 1:5 (one Part of cement, Three part of Sand) mix using all granite stones and bond stones for foundation and basement from approved quarry including watering, curing, and labour charges etc., completed as perstandard specification
12
-
-
Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications
91
-
-
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
788
-
-
Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work
86
-
-
Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement
44
-
-
Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.
8
-
-
Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum
91
-
-
Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete
76
-
-
Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.
126
-
-
Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]
215
-
-
Painting two coats for wall surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.
931
-
-
Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 60 X 60cm in size in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), of best approved quality and as per standard specifications etc.,complete.
15
-
-
Supply and erecting 1 HP monoblock with ISI mark with necessary accessories complete complying with standard specification
1
-
-
Solid PVC Door Shutters using 19 Gauge 19mm MS squaretubes for styles and outer frames. 15mm MS square tubesfor top, lock and bottom rails. The steel tubes shall becovered with 5mm thick solid PVC Sheets. Shutter using5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. Theover all size of styles shall be 50mm x 30mm. The over allsize of top rail, lock rail and bottom rail shall be 75mm x30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter -Solid panel PVC door with frame
17
-
-
Providing and fixing Door Frame in position to line and level in Malaysian/Ghana Teakwood frame out of specified sections finished size135mmx65mm asper drawing details including cuttingrebate,finished in 3 coats of natural polish matt finish (TUFFWOOD OR EQUIVALANT) matching the shutter laminate finish of approved colour & shade as per Architects instructions.
2
-
-
Supplying and fabrication and fixing in position of anodised natural colour matt finish sliding window in two track in all floors with following sizes. All the three shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded aluminium section for outer frames as shown below with necessary accessories such rubber beading. Aluminium clips, rubber beading,handle and fixing 4mm thick clear sheet glass including all required for fabrication etc., complete.Necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers.The Al.Surfaces is to be anodised with matt finish under electrically condition in accordance with ISI 1868/1962 specification for an average anodic film thick of not less than 15 microns.
18
-
-
Providing & fixing of 20mm Dia CPVC pipes confirming to ASTM standard including all CPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 6 kg/sq.cm hydraulic pressure, for 2 hours etc.
20
-
-
Providing & fixing of 25mm Dia CPVC pipes confirming to ASTM standard including all CPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 6 kg/sq.cm hydraulic pressure, for 2 hours etc.
4
-
-
Supplying laying and jointing of 25mm Dia G.I. Pipes of approved quality and best varity of B Class pipe of the following sizes including fixing G.I specials but excluding cost of such specials cutting threading of pipes and fixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holes in roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red-oxide primer etc., complete.
333.02
-
-
Supplying laying and jointing of 32mm Dia G.I. Pipes of approved quality and best varity of B Class pipe of the following sizes including fixing G.I specials but excluding cost of such specials cutting threading of pipes and fixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holes in roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red-oxide primer etc., complete.
55
-
-
Supplying and fixing in position first quality and approved of 20mm Dia Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.
1
-
-
Supplying and fixing in position first quality and approved of 25mm Dia Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.
14
-
-
Supplying and fixing in position first quality and approved of 32mm Dia Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.
2
-
-
Providing, fixing, testing and commissioning of 160mm Dia PVC solid waste and vent pipe confirming to IS 13592 of SWR quality 4 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines.
Note: Rate is excluding for earthwork and backfilling. It shall be measured separate and paid under Earth work item.
316.85
-
-
Providing, fixing, testing and commissioning of 90mm Dia PVC solid waste and vent pipe confirming to IS 13592 of SWR quality 4 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines.
Note: Rate is excluding for earthwork and backfilling. It shall be measured separate and paid under Earth work item.
48.6
-
-
Providing, fixing, testing and commissioning of 110mm Dia PVC solid waste and vent pipe confirming to IS 13592 of SWR quality 4 kg / sq.cm pressure rated 10mm, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI 'U' clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines.
Note: Rate is excluding for earthwork and backfilling. It shall be measured separate and paid under Earth work item.
247.75
-
-
Supply and delivery and fixing of 2000 Litre capacity HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,
1
-
-
Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting
3
-
-
Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications
8
-
-
Borewell Drilling of 8" Dia MS Casing Pipe and Erection of power Pump including suction pipe, valve pressure, pressure gauge pan el board consisting of TPICN switches starter, Voltmeter, Ammeter, three indicator lamps capacitor and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumps and trail run for 10 days including signing of completion of reports as required by EB authorities and finishing the pipe holes including the foundation bolts, nuts and earth pits. WD-W0868 Upto 3 HP Each 12614.15 WD-W0869 Above 3 HP upto 7.5 HP Each 14738.20 and 3 phase submessible pump with motor LPM 50 x 75mm - 1m 63mm Dia HDPE Pipe 150mm and supply and fixing of star - Delta starter -1m etc completed as directed by the officers
1
-
-
Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.
1
-
-
Wiring with 2x1.5sq.mm. PVC insulated single core unsheathed FRL Scopper conductor cableof1100V grade insuit able heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5AFT switchwithpaintingof suitable colour continuous earth wire connection of 1.5sq.mmc opper wire for light point/fanpoint(for electronic regulator)
9
-
-
Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A FT switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for light point / fan point (for electronic regulator)
12
-
-
conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with MS switch box in flush with wall with 5A FT switch with 3mm thick hylem sheet cover MS switch box with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion for concealed light point / fan point (for electronic regulator) Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper
10
-
-
Wiring heavy with point ith 3 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade on suitablegauge MS conduit pipe on wall and ceiling with MS accessories with MS switch box and 5A FT switch (two way) painting of suitable
2
-
-
conduit pipe on wall and ceiling with MS accessories with MS switch box with 5A FT switch (two way) in flush with wall and covered with hylem sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open staircase light point
4
-
-
Wiring with 3 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories with MS switch box with 5A FT switch (two way) in flush with wall and covered with 3mm thick hylem sheet for MS switch box with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed staircase light point
22
-
-
Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with suitable MS box to house the control switch and regulator
7
-
-
Supply, erection, testing and commissioning of Cable Trey for GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm width and 50mm height
89
-
-
Supply, erection, testing and commissioning of Cable Trey for GI Hot Dip / Powder Coated 16 SWG Cable Tray with300mm width and 50mm heightt
16
-
-
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) 1 No. 32A DP MCB as incoming and 6 Nos. 6A to 32A SPMCB outgoing in flush with wall and making good of the concealed portion with eart
4
-
-
Supply and fixing of 150W LED flood light Fitting with Driver including cost of all materials , labour, lead lift etc., complete.
16
-
-
Supply and fixing of 20W LED Tube Light for T8 Fitting (Single Side) with LED including cost of all materials , labour, lead lift etc., complete.
2
-
-
Supplying and fixing of 15W LED Fitting with LED including cost of all materials , labour, lead lift etc., complete. (SD 529)
25
-
-
Supplying and laying of3.5 core x 95 Sqm armoured aluminium conductor cross linked polyethylene insulated pvc sheathed cables conforming to IS 7098 (part I) 1988 and as amended with ISI mark
18
-
-
Supply and fixng of TNEB meter boards uitable for 3 phase 100A service connection made up of suitable angle iron framework of size 2feet x 1-1/2feet using angle iron of size1-1/2"x1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2feetx1-2feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos.100A fuse units (500V), 1No. neutral link, copper earth flat of size 1"x1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete
1
-
-
Supply and fixing of copper earth flat of size 1" x 1/4" earth pit main panel board including cost of materials and labour charges
10
-
-
Earthing as per PWD standard with an earth electrode of 2 metre Class'B GI pipe of dia notless than 32mm complete with necessary masonry work
2
-
-
Supply and Fixing 3x 4.0 sqmm flat cable in 37mm dia white PVC 4Kg pipe slive and earth work laying work. (For Security Room 1 to Bore well) for( MainPanel and PEB)
65
-
-
Supply and Run of 4 of 10 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade on 7/20 GI wire for service connection mains
53
-
-
Supply fixing and errection of CCTV Camara including cost and Conveyance of all materials to site etc complete as per Specification
-
-
-
Hikvision PTZ Camera
Dahua 2MP DH-SD3A210-GN-A-PY 3-
inch 2MP 10X30Mtrs,With Full Color, Network Speed Dome PTZ
1
-
-
Hikvision Bullet Camera
Hikvision 4MP POE IP Camera DS- 2CD1043G0E-I HD Bullet H.265+ 2.8mm
20
-
-
Hikvision NVR
32 Channel Metal 4 SATA 4K NVR DS- 7732NI-K4,256 Mbps Incoming Bandwidth,H.265+
1
-
-
Network Switch
Secureye 8+2 Full Giga POE S-8GE- 2UG-NW(10/100/1000)
5
-
-
Hard disk
4TB Toshiba Surveillance Harddisk
2
-
-
CAT6 Cable D-Link CAT6
660
-
-
Rack 6U 500D Rack / Tray For Switch / With Spike
1
-
-
Connectors RJ45 Jack
50
-
-
Rack
2U Rack PVC Box With Spike
5
-
-
Network Switch
8 Port Network Data Switch
4
-
-
Network Management System (NMS) client server, peripherals & other accessories with necessary soft copy of software & furniture Server System - having (Monitor -1, CPU -1 with installation charges etc .,
1
-
-
supply and delivery of furniture for Admin Office ( 4 - chairs & 1 - Table, 1 - Rolling Chair), Security Room - (4 Chairs and 2 Table), Weigh Bridge - (4 Chairs & 2 Tables)
1
-
-
Weigh Bridge including required hardware for weighment display, software, RFID reader and automatic (human-less) reader 1. 10T - 1 (5.0 x 2.5m)
2. 40T - 1 nos (7.5 x 3m)
Boom Barrier - Automatic with Auto Vehicle detection
1
-
-
Static Compactor machine along with complete Electricals and Hydraulic system consist of
• Horizontal Compaction Machine SC – 260 with Tip Cart mechanism / Hopper
• Hopper
• Guillotine system
• Hydraulic Clamping Claw
• Drainage System for leachate
• Hydraulic Power Pack
• PLC based Electronic Controls.
• Container change over system (Two Containers)
The chamber volume of 3m3 - Compress cycle time in 41Sec - Theoretical Volume Capacity of 263 m3/h - Voltage of 415V - Rear tipcart lifting capacity of 2500 to 3000 kg - Rear Tipcart Volume of 5-8m3
2
-
-
Container Change Over unit A two-container change over system is provided to move the filled container from the compactor and replace it with an empty container already placed on the tracks for replacement. This system is driven by hydraulic cylinder.
2
-
-
Hook Loader 20 T Capacity should lift and transport 20m3 container carring MSW. Hook Loaders are fabricated in accordance with CE machine regulations and ensure the safety of its operator and its environment.
Hook loader must cinsists of suitable pump, valve, cylinders and rear Stabilizer for smooth operations in the Transfer Station. Material of Construction high grade Steel – S420, E450, S355
4
-
-
Trucks 28 T Capacity {Make: Eicher / Ashok Leyland / Tata}BS-VI ARAI certified having Wheel base minimum 4800mm upto 5200mm.•
3
-
-
Container 20 Cum must be constructed with suitable design with carrying capacity upto 17.50Ton pay load of MSW Round shaped container ensure that the discharge will be smoother at lower tipping angle and no residue will remain in the container, after discharge. Front of the container has a V-shaped structure with a hook eye made of special steel, which bears the forces during on- n - off rolling of the container.At the rear side two heavy duty rollers are attached for easy movement of the container on the ground during on-n-off rolling.
4
-
-
Insurance, Registration, Road Taxes, Transportation,
1
-
-
Installation, Trail Run and Commissioning
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%