Municipal Administration And Water Supply Department Tender

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates ) using 20mm size ISSHBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Providing and laying, spreading and compacting 0.395m3 of 45-22.40mm & 0.528m3 of 22.40-2.35mm & 0.395m3 of 2.35mm and below metal graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in subbase/basecourse on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 405 of MORTH specifications. MDU-CORP DATA-P-23 -SL No:8

Supplying and laying Rubberised Interlocking Paver Block M40 grade Providing and laying of 80mm thick high strength type conforming IS 15658-2007 of rubberized interlocking Paver Block in size of minimum compressive strength of 40N mm2 in uniform shape of approved make to be laid in flurring bone pattern with quarry rubbish cushion below the uniform shape of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, quarry rubbish cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers, sweeping transporting loading unloading of laying paver block as per standard specification.

Raising the existing circular man hole in heavy type including the removing the existing the man hole cover with frame and dismanting the existing the cement concrete wall and tar road surface around the manholes using 1:2:4 20mm jally for raising the existing the manhole wall and using cc 1:2:4 with 20mm chips for finishing the top surface of manhole etc complete.

Manufacturing Supply and Fixing of Retro Reflective Road Name sign board single arrow big size out if wide angle cuble corner micro prismatic grade sheeting confirming to IRC 57:2010 & type xI standards of ASTM D 4955-09 specifications and fixed over 2mm thick aluminium sheet back support frame of stainless steel supported by 32 NB stainless steel pipe all around and 55 NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cmx30cmx45cm complete. The information message shall be made out cut out letters in blue transparant overlay film as per IRC 57-201 Guidelines , 7years pre qualification warrenty for Retro Reflective sheeting from the original sheeting manufacture & a certified copy of three years out door exposure report from an independent test lab for the product offered shall be submitted by the contractor. The sign board shall be Retro Reflective type xI. The Retro Reflective sheeting should have manufactures WATERMARK on the sheeting surface for identification. Single Arrow Big Size 35" x 18"

Add Gst 18%