Municipal Administration And Water Supply Department Tender

Providing and laying Bituminous Concrete to 30mm thick using 0.13cum of 19.00 -9.50mm Graded metal and 0.17cum of 9.50 -2.36mm and 0.26cum of 2.36mm and below metal with 45.27 kgs of 60/70 bitumen and 5.03 Kg of plastic waste collected from Municipal Garbage at Free of Cost (Total 50.30 Kg) and for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix required temperature for uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 80 -100 KN Power Roller to the required density etc.,including labour for loading bitumen tank and metal to feeder unit, labour for attending to paver site etc.,including hire charges and fuel charges for 20-30T CMP with bitumen boiler, tippertrucks, Paver Finisher, Power rollers and all other tools and plant required, including all other incidental charges etc., complete using CMP clause 507 of MORTH Rev-5 Specification

Providing and laying of hot thermoplastic compound 2.5mm thick including reflectorising glass beads @250grams per Sqm area thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35 .The finished surface to be level,uniform and free from streaks and holes etc., complete (as per MORTH& Specification n.o803)