Municipal Administration And Water Supply Department Tender

Supply of Vacuum feed gas Chlorinator Vacuum line accessories Supply and installation of Chlorine Gas Flow controller assembly Cabinet:- body: FRP, Type: frame mounted Flow control valve:- Body: Rigid PVC - FRP Lined, Spindle: Rigid PVC-SS 316, Seat: Teflon, Test pressure: 9 Kg/cm2 (Pneu) Rota meter: Borosilicate Glass, Float: Teflon, Body: Rigid PVC, Range : 0 to 5kg/hr Supply and installation of gas chlorine system Check Valve Connections: 3/4", Screwed end, Body: Rigid PVC, Deadweight: Lead in PVC Casing, Sealing: Viton/EPDM, Supply and installation of gas chlorine system Drain Valve Supply and installation of gas chlorine system Injector Type: Fixed throat, connection: 1 1/4" Flanged end, Body: Rigid PVC with FRB bonded, Nozzle : PVC- Teflon, minimum available inlet pressure- 1.5 Kg/cm2, vacuum capacity - 760 mm of Hg

Supply of Vacuum feed gas chlorinator gas line accessories Supply and installation of Automatic Vacuum Regulator (AVR) Type: wall/ frame mounted, Operating vacuum: 150 mm of Hg, Body bottom & top: IS 2062, body middle: Rigid PVC, Spindle: Monel, seat & diaphram: teflon, Spring: Spring steel (Plated -Not a Wetted Part), Test pressure :9 Kg/cm2 (Pneu), Supply and installation of COILED COPPER TUBE CONNECTOR 3/8" OD corrosion resistance plated annealed copper tube, minimum wall thickness 1.2mm, 1.5m length, 5/8" BSP (F) brass nipple connection, 40 Kg/cm2 (Hyd) tested Supply and installation of gas chlorine system manifold fittings, connections, flanges , bolt & nuts, welding, fabrication etc., & Rate required for per RM length) Type: single cylinder manifold,, size: ¼", Pipe material: ASTM A106 Gr. B Sch 80, Flange: ASA 300 #, Fittings: 3000 # Forged Carbon Steel, Gasket/washer: lead Supply and installtion of Pressure Regulating valve (Gas chlorine Purpose) ASTM A 105 body/casing, ASTM 106 Gr B &sch 80 pipe, teflon seat &diaphram, Spindle: Monel, Bonet: IS 210, Flanges: 3/4", ANSI B 16.5 Class 300, set range: 0 to 3 Kg/cm2, Flanges: 3/4", ANSI B 16.5,Class 300, Spring (Bottom): Spring steel (Teflon coated), Spring (Top): Spring steel (Plated), Test pressure: Body :45 Bar (Hyd) & Seat :9 Bar (Pneu), Supply and installation of CHLORINE ISOLATION VALVE Aluminum Silicon Bronze, Seat &stem: Monel, Connection: ¼" NGT (M) x %" BSP (M) 1, Test

Supply of Vacuum feed gas chlorinator make up and motive water line accessories Supply and installation of UPVC pipe line with fittings (Rate including all the fittings, connections & Rate required for per RM length) Size: 1", Schedule 40, UPVC-IS: 4985 ,including pipes, fittings, flanges, connections etc., . Supply and installation of Water line valve flanged Size: 14", Connection: flanged type, Body & Ball: PVC, lever: PVC/ABS, seal: EPDM/equivalent, Type: Regular Port, Test Pressure: 150 Psi (Hyd), application: water line