Municipal Administration And Water Supply Department Tender

Patch work using 13.20mm IRC HB metal precoated with 44 kg and 80/100 bitumenper one cum of metal including cost and conveyance of bitumen which will be supplied by the contractor with all labour charges for heating bitumen premixing laying etc including cost and conveyance of metal to departmental officers etc complete.

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev V Specifications

Providing and laying tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and laying tack coat of 2 kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5

Providing and laying Bituminous Concrete to 30mm thick using 0.13 cum of 19.00 - 9.50mm graded metal, 0.17cum of 9.50 -2.36mm graded metal and 0.26cum of 2.36 mm and below metal by adding the sheddered plastic 10 % of bitumen quantity 4.02 kg (50.30x8%=4.02 kg) sheredded plastic waste over the aggregate heated to 170 degree celsius in central hot mix plant,mixed well with 46.23 kgs of hot bitumen VG30 bitumen(160 degree celsius ) 60/70 grade for premixing per 10sqm to lay 30mm compacted thick of bituminious concrete including the cost of materials and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 80-100 KN Vibratory roller/ Pneumatic Roller to the required density etc., including labour for loading bitumen into bitumen tank and metalfrom feeder unit, including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5.

Manufacturing, supply and fixing of Retro Reflective Road Name Sign Board single Arrow of size for area less than 0.90m2 made out of wide angle cube corner Micro prismatific grade sheeting confirming to IRC - 67 : 2010 & type XI standard of ASTM D 4956 - 09 specifications and fixed over 2mm thick Aluminium sheet and back support frame of 25x25x3mm MS Angle frame supported by 32 NB stainless steel pipe all around and 65 NB pipe vertical post firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 30cm x 30cm x 45cm etc., complete.Height of Board above ground level should be minimum 1.50metre. The information message shall be made out of cutout letters in approved colour transparent overlay film as per IRC 67 - 2012 Guidelines.

Road marking with hot applied Thermoplastic compound with Reflectoring glass beads on Bitumen surface . Providing and laying hot applied Thermoplastic compound 2.5mm thick including Reflectoring glass beads at 250 grams per area . THICKNESS OF 2.50MM EXCUSIVE OF SURFACE APPLIED GALSS BEADS AS PER IRC : 35 . The finished surfaced to be level uniform and free from streak and holes.