Municipal Administration And Water Supply Department Tender

Providing water Bound Macadam for 75mm consolidated thickness for the bottom layer with grade II metal using 1m3 of 63mm to 45 mm IRC size HBG metal with 0.243 of gravel for screening for 10m2 of 75mm consolidated thickness, the grading of metal to confirm the table-400-6 of most specification including cost of conveyance of all materials to the work site and stacking them with the standard departmental guage labour charges for spreading metal and gravel hand packing metal to camber watering with all leads for water forming edge Bunds etc, and consolidating by power Roller and hire charges for all other tools and Plants etc complete as per clause 404 of Ministry of surface Transport Specification II revision

Providing water bound macadam for 75mm consolidated thickness for the top layer with grade III metal using 1M3 of 53mm to 22.4mm IRC size HBC metal with 0.24M3 of gravel for screening for 10M2 at 75mm consolidated thickness, the grading of metal to confirm to table 400-6 of most specifications including cost of conveyance of all materials to the work site and stacking them with the standard departmental gauge labour charges for spreading metal and gravel hand packing metal to camber watering with all leads for good water forming edge bunds etc. and consolidating by power roller and hire charges for all other tools and plants employed etc. complete as per clause 404 of most specifications II revision.

Tack coat using 4kg of 80/100 bitumen for / 10m2 over WBM Surface including hire charges manually labour charges etc complete.

Providing and laying tack coat of 2kgs/10 sqm over the BT surface treated with binder using 2 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Specifications

Providing and laying premix carpet with seal coat type 'A' 20mm consolidated thickness using IRC size machine broken HG metal 0.18 cum of 13.20mm and 0.09 cum of 11.20mm with 14.60 kg of 80/100 grade Bitumen for premixing for 10 sq.m of premix carpet and 0.09 cum of 6.70mm IRC size HBG metal with 9.80 kg of 80/100 grade bitumen for 10 sq.m for seal coat including cost and conveyance of all materials from approved quarry to work site and stacking them to departmental gauge for pre measurements including cost of bitumen which will be procured by the contractor at his own cost including conveyance of bitumen to work spot, handling charges for the same at both ends including heating the bitumen boiler, heating the aggregates and mixing them with Bitumen in mini hot mix plant for premix carpet rolling by power roller for premix carpets and sealcoat separately including labour charges for spreading the mix for premix carpet application bitumen for seal coat over the premix carpet including labour charges for spreading the seal coat including hire charges and running charges for mini hot mix plant power roller and all other tools and plants employed all indicated charges such as barricading, providing danger lights etc., complete complying with standards specifications as per MOST 509, 513.

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications

Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications

Advance Patch work 13.20mm Providing Advancve Patch work using 50mm consolidated Thickness by using 1 m3 of 13.20mm IRC Metal with 44kg of Bittumen per 1 m3 of Metal For Pre Mixing For existing surface advance Patch work including cost and conveyance of materials to the work site and stacking them to the departmental metric guage for the premeasurement, heating the bitumen in bitumen boiler, heating the aggregates and mixing them with bitumen in mini hot mix plant for premix carpet only rolling by 60-70KN power roller for premix carpet and seal coat seperately including labour charges for spreading the mix for premix carpet application of bitumen for seal coat over premix carpet, including labour charges for spreading seal coat seperately over premix carpet etc. including higher charges and fuel charges for , bitumen boiler and all other tools and plant employed etc. complete as per of MoRTH Rev - V Specifications