Municipal Administration And Water Supply Department Tender

Providing Centering with MS sheet

footing

column

beam

Slab

Reinforced cement concrete M20 1:1.5:3 granite metal by volume, characteristic strength not less than 20N/sqmm) machine mixed for all reinforced cement concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with relevant standard specifications at all leads inside the building.

Supplying, cutting, bending and placing of reinforcement stel of MS, HYSD bars for all type of RCC works at all levels including cost of 18 gauge GI binding wire cost, labour etc., as per design and details complete.

Fly ash Brick work in CM 1:5 (one cement & five sand) using size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Fly ash Brick work in CM 1:4 (one cement & four sand) using size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Filling with Pallam Sand

Providing weathering Course concrete broken brick jelly of 20 mm Size in pure slaked lime over RCC Slab the Propotion being 32 :12.5 for required slope and average thickness 0.08m on roof as required and well beaten with wooden beaters etc complete

Supply and fixing of grill with using 12mm dia square rod and iron flat all necessary material and labour charges for cutting,bending,welding and fixing etc complete

UPVC WindowSpecification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multichambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded andcleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong lockingsystems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work

Plastering in cement mortor 1:3 mix (one cement,threee sand) 12mm thick including cost and conveyance of all materials and labour charges for mixing the martor

Plastering in cement mortor 1:5 mix (one cement,three sand) 12mm thick including cost and conveyance of all materials and labour charges for mixing the martor, and the surface rubbed for smooth and curing to required period, etc complete as per std Specification.

Daddoing the walls with first quality colour glazed tiles of 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete

Flooring finishing with first quality design Ceramic tiles of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete

Solid PVC door shutter using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fix in position including necessary furniture and fittings. The cover all size of top rail, Lock rail and bottom rail shall be 70mm x 45mm, with suitable rebate for housing the shutter.

Painting with plastic emulsion paint two coats along with base coat of approved quality (ISI Standard) paint as per the standard specification. (The paint to be used should be got approved by the Executive engineer before use on work)

PAINTING new IRON WORKS for doors, windows and Ventilators, Iron bars Weld mesh, wire mesh, screen, steel bars, flats and other similar works etc., with TWO COATS of approved first quality of synthetic enamel paint over a base coat of red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. The paint to be used should be got approved by the Executive engineer before use on work.

Supplying and fixing of Wash Hand Basin of size 550mm x 400mm with all accessories such as cast iron Brackets,32mm Dia CP Waste coupling .,rubber plug and Chain,32mmDia B Class GI waste pipe ,15mm Dia G M Wheel Valve 15mm Dia Nylon Connection , 15mm Dia Bress Nipples,15mm cp ,Piller tap Etc

Supplying and fixing in position of Indian make colour water closet of size in 580mm * 440mm weight glassed earthan ware of approved with P Trap (or) S Trap and foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m. 1:3 12 mm thick including fixing in position levelling complete with necesary connection as per standardspecification

European Water Closet (Colour) with 'P' or 'S' Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings

Supplying and fixing vitreous china flat back lipped urinal basin including cost of 15 mm CP angle valve, 15 mm PVC inlet connection, 32 mm diameter PVC waste connections, white cement and dismantling masonry necessary and redoing complete.

Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A.F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour PVC concealed light or fan point.

Supply and Fixing of 4' 18W LED tube light fitting of approved brand including labour charges for fixing in wal and ceiling with necessaey accessories like clips,screw etc., complete

Supply and fixing of 1200mm (48") AC ceilling fan complete with energy efficent celling fan of 28 watts, regulator with 0.3 meter down rod on the existing clamp of approved brand and quality etc., complete

Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 150mm x100mmx113mm TW switch box with 3mm thick hylum sheet cover for 5A.3PIn non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour for concealed PVC plug point.

Wiring with 2x4 Sq.mm (56/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 150mm x100mmx113mm TW switch box with 3mm thick hylum sheet cover for 15A.3PIn non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour for concealed PVC Power plug point.

Supply and Fixing of light of 11W CFL Bulk head Fitteing of approved brand and quality with required materials like pipe, clamp etc

Supply & fixing of UPVC,PVC ,CPVC Pipes & Specials of an approved brand etc., complete

Pvc 140mm 6ksc pipe

PVC Coupler 6ksc

PVC Bend

25 mm pvc pipe

25 mm pvc coupler

25 mm pvc Tee

25 mm Pvc Elbow

25 mm Pvc MTA

25 mm Pvc tap

25 mm Upvc ball valve

25 mm UPVC Pipe

Supply and Fixing of HDPE Tank of 1000 liters capacity of approved brand and quality with required materials etc complete