Municipal Administration And Water Supply Department Tender

Purchase of Cesspool Tanker -6000 litre capacity with following specifications:- Validate Print Help 1 1.1 Cesspool tanker 1.00 Nos 0.00 INR Zero Only Total in Figures 0.00 INR Zero Only Quoted Rate in Words INR Zero Only Purchase of Cesspool Tanker -6000 litre capacity with following specifications:- Features:- Vacumm Pump Type – Rotary Sliding Vane, Cooling – Air cooled, Drive – Chassis side PTO ,Tank – Tank Rear Door Opening Manual ,Tank tipping/Angle Not Applicable ,MOC – IS:2062 Gr.B,4-6 mm Thickness,Thickness of Steel Plate IS:2062 Mild Steel Grade .B with proper Reinforcement to withstand the Required forces,Construction–Cylindrical,shall with torispherical dished ends, Suction Hose – Dia./Length / Qty / 4”/3 mtr. / 6 Nos, Sludge Suction & Drain Valve – Size 4”, Type – Knifegate or Ball Valve Capacity:- Tank Valume – Water Storage tank – 1000 liter, Sludge Storage tank – 5000 liter, Vacuum Pump – Make Jurop / Moro / Gardener Denver Mistral / Battioni or equivalent, Flow / Vacuum – 500 – 550 Cum./hr./90%, Jetting Pump – Working pressure 130-160 bar, Hose length 100- 150m, Size 3/4”dia, Water flow for pump of jetting machine – 100 – 153 LPM, Minimum Burst pressure of Jetting Hose – 500-520 Bar, Maximum working pressure of jetting Hose 200-220 Bar. Safety:- Water level indicate – Type / Qty. – Tube type / 02 Nos., Pressure relief valve – Size / Qty. – 2”/1 Nos., Vacuum relief valve – Size / Qty. 1.5”/1 Nos. Mounting:- Chassis – GVW – 12 Ton, Emission Norms – As per Local RTO, Chassis Engine Output – Min. 90 HP, Driver’s Cabin Type – Single (Day) Cabin, Make – Ashok Leyland / Tata / Eicher / Equivalent with PTO with emission of norms BSVI, Make / Model / WB / HP / Side PTO Provision – Any other equivalent model of other chassis manufacturers, Scope - Customer, Side PTO Provision – Provision required. Dimensions: Equipment Length – 4500 – 5150mm approx. Height – 1500-2200 mm approx. Overall width – 2000 – 2250mm approx. Overall Length – 3000 – 3500mm approx Equipment rear overhand – 600 – 1600mm approx. Painting:- Surface preparation and finish – Equipments Exterior – Spray-painted with two coats of superior quality anti-corrosive primer and two coats of enamel metal paint. Colour code will be as per tender requirements. Tank’s Interior – Coated with 2 coats of superior quality anti-corrosive grey epoxy paint. Including GST ,Registration Fee,Road tax and Insurance (one year O&M by supliers) etc., complet