Municipal Administration And Water Supply Department Tender

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

Supplying fabricating and placing in position of MS grills for reinforcement rate inc. the cost of steel for all works (the rate to include cost of binding wire also).

Supplying and erecting shuttering with necessary support for plain surface such as R.c.c boxing side slab and smilar r.c.c slap with all cross bracing etc.complete in all floors of any height.(The retrieved materials should be taken back by the contractor) the payment for centering shall be given after the concrete is laid (vertical portion)

Brick work in CM 1:5 (one cement & five sand) using\ III class country bricks of size 8 x3/4"X41/4"X 2 1/4 " including finishing, curing, etc., complete complying with standard specification., (For G.F)

Fabrication supply and fixing of steel door made of 40x40x6mm MS angle for outer frame and shutter made out of 35x35x6mm MS angle with necessary stiffness 32x6mm and flats at 30cm interval and necessary cross diagonal MS flats. The shutter frame should be fully covered by 18G GR sheet and provided with required locking arrangements and one coat of red oxide paint and primer etc…

Plastering with cement mortar 1:3, 20 mm ,thick in all floors mixed with W.P.C. including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Supply and fixing of cuddabah slab 30mm thick etc complete

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete

Supply and fixing of manhole cover SFRC of size 600mmx600mm

Painting 2 coats with approved Plastic emulsion paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Providing and making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire Mesh Gabion Boxes as per IS 16014:2018, SP 116:2018 of required size, Mesh type 10 x 12 (D=100mm with tolerance of ± 2%), Zinc + 10% Aluminium Alloy + PVC Coated, Mesh Wire diameter 2.7 / 3.7mm (ID/OD), mechanically edged / selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2 / 3.2mm (ID/OD), supplied @3% by weight of Gabion boxes, filled with boulders with least dimension of 200mm, as per drawing, all complete as per directions of Engineer-in-Charg

Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with paintingof suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC light point / fan point(for electronic regulator SD 16

Supplying and fixing of AC Ceiling Fan complete 1200mm (48”) Sweep with 300mm Down Rod (without Regulator) (Higher End)

Supplying and fixing of box type twin fluorescwnt fitting with copper choake and condensor (HPF) coplete with isi mark 4FT 18 watts

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. 50x25 stage

Supply of PVC pipe and G.I pipes and PVC pipe & Specials. - 32mm pvc pipe

32mm pvc coupler

32mm pvc elbow

Labour Charges for erection of Horizontal shaft, centrifugal pumpset (Coupled/Monoblock) in bore well/Open well including fixing of suction pipe and foot valve upto a maximum depth of and delivery pipes to the required length with valves, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authorities.

supply of 4sqmm cable PVC insulated and sheated 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 AND AS Amended thereafter

Add GST 18%