Municipal Administration And Water Supply Department Tender

Supplying fabricating and placing it in position of MS or R.T.S. rods for an RCC works including cost of steel and binding wire and also cutting, bending, tying grills and straightening fabrication charges etc., complete complying with std. Specification.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid )Footing And Plinth Beam

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.complete as per the direction of Engineer-in-Charge.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

Plastering with cement mortar 1:5mix 12mm thick including all cost and conveyance of all labour charges and other incidental charges etc, complete

Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Providing supplying and fixing of 12.5mm thick MS Plate for Bus shelter's columns support. Size: 300mm x 300mm x 12.5mm thick. Each coloumns should have 2nos of MS plate with necessary holes for fixing of 1" dia Bolts.as directed by the Engineer-in-Charge. 98kgs/ sqm for 12.5mm plate

Spl Work: Providing supplying and fixing of L bend 1" dia GI threaded rod from foundation to column base plate. complete as per the direction of Engineer-in-Charge. Weight of 24mm GI Rod is 3Kg / Mtre

Providing supplying and installation of SS Bus Shelter with 304Grade Matt finish SS Pipe arrangements for SS Bus shelter. 168mm dia ss pipe to be used 2nos of columns & 1no of horizontal member, 114mm dia ss pipe 1no as horizontal, 60mm dia ss pipe for chair/bench outer members, 40x40 square tube to be used chairs inners, advertisement board outer frame and purlin members, 4mm thick ss sheet to be used for side end caps, roof rafters, purlin support, 8mm thick ss sheet to be used flange and cleats wherever required details as per the dwg, complete as per the direction of Engineer-in-Charge.

Fabricating supplying and fixing of roof with Poly carbonate sheet of 6mm thcik with any colour or any other approved design and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Providing supplying and fixing of SS Signage at Roof top. Made of 1mm thick SS sheet with necessary etching work of images complete as per the direction of Engineer-In-Charge.

Providing supplying and fixing of 12.5mm thick MS Plate for Bus shelter's columns support. Size: 300mm x 300mm x 12.5mm thick. Each coloumns should have 2nos of MS plate with necessary holes for fixing of 1" dia Bolts.as directed by the Engineer-in-Charge. 98kgs/ sqm for 12.5mm plate

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 6 sq. mm + 1 X 4 sq. mm earth wire

Wiring for light point/ fan point with 2 runs x 1.5 sq.mm FRLS PVC insulated copper conductor wiring with pvc conduit and earthing the point with 1.5 sq.mm. The rate is inclusive of cost of Wire, conduit, clamps, screws, labour and transport charges.