Municipal Administration And Water Supply Department Tender

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Plain Cement Concrete 1:2:4 (one cement two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per sta

Greenery and Plantation at Bund side PROSOPIS JULIFLORA REMOVAL Cleaning juliflora jungle with uprooting

Earth work excavating for Digging of 60cm pits in silt or other loose soil, wet sand or silt not under water, light black cotton soil sandy loam and ordinary soil including excavated earth every plantation 1.00 m intervel (SS20A)

Supplying and planting colourful Avenue trees as directed by the Engineer in charge including digging holes size of 2 x 2 x 2 in red soils and refilling the same with manure floating with water dressing and removal of rubbish, surplus earth if any with all leads and lifts also maintenance of plants for a period of 90 days from the date of planting works

Supplying and planting Arica palms as directed by the Engineer in charge including digging holes size of 1x1x1 in red soils and refilling the same with manure floating with water and dressing removal of rubbish, surplus earth if any with all leads and lifts also maintenance of plants for a period of 90 days from the date of planting of work

Supplying and planting Creepers all varieties all as directed by the engineer in charge including digging holes in ordinary soils and refilling the same with excavated earth mixer with manure flooding with water dressing surplus earth if any with all leads and lifts also maintenance of plants for a period of 90 days from the date of completion of work

Supplying and planting Tecoma yellow as directed by the Engineer in charge including digging holes size of 1x1x1 in red soils and refilling the same with manure floating with water and dressing removal of rubbish, surplus earth if any with all leads and lifts also maintenance of plants for a period of 90 days from the date of planting of work

Provision of vertical causirina poles to the planted seedlings 2-50 mtr per plant Tying plants to vertical stick and Provision for Tree guard using Bamboo with Green Cloth

Chute wall Casting of precast cement concrete blocks of size 20 x 20 x 15mm in Plain cement concrete of mix 1:1 1/2:3 ( One cement one and half sand and three aggregate) using 20mm size hard broken stone jelly and mixing the concrete and laying the concrete in steel moulds after oiling them properly at casing yard and vibrating finishing the top surface smoothy placing the slab along with mould and plate in the casting yard removing the mould carefully after initial setting, Placing the slab in the curing bond after 24 hours from the time of casting, removing them from the curing pond after 7days of curing, stacking them in the stacking yard with in a lead of 100m and curing them from the full period by sprinking water as directed by the departmental Officers.

DESILTING AND DEEPENING Earth work excavation for foundation in Sand, Silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

COMPOUND WALL Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc., complete

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c) and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. Centering for raft and side wall

Colum

Providing and laying in position ,Standardised MIX M-25 Grade in accordance with IS:456-2000 Using 20mm and down graded hard broken granite stone jelly for all RCC items of work with minimum cement content of 350kg/m3 and maqximum water cement ratio of 0.55 including admixture (plasticiser/super plasticiser)in recommended proportion as per IS:9103 to accelerate retaed setting of concrete improve workability without impairing strength and durability with about (5 cu.m)7730kg.of 20mm machine crushed stone jelly and with about (3.3cu.m)5156kg of 10-12mm machine crushed stone jelly and with about (4.79cu.m)7670kg of sand but excludind cost of reinforcement grill and fabricating charges centring and shuttering and also including laying vibrating with mechanical vibrators finishing ,curing,etc.complete complying with standard specification and as directde by the department officer the coarse and fine aggregates to be used should comply with the requirement of is standards.(No separate payment will be made by the Department for the excess usage of materials) TNBPC-30

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors as per standard specification.

Fly Ash Bricks in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 230 x 110 x 70mm including finishing, curing, etc., complete complying with standard specification - 100CFT

Supplying and fixing of grill work, grill design approved by department engineer etc., complete, cost including all materials costs, labour chrages, conveyance and all other costs etc., complete as per standard specification.

Plastering CM 1:5 (One cement and five P sand) mix 12 mm thick etc., complete, cost including all materials costs, labour chrages, conveyance and all other costs etc., complete as per standard specification.

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

CHAIN FENCING Supplying laying and jointing G.I. Pipes of approved quality and best varity of B Class pipe of the following sizes including fixing G.I specials but excluding cost of such specials cutting threading of pipes and fixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holes in roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red-oxide primer etc., complete.

Supplying and Fixing of Chain link-2"x2" using 10 Gauge Galvanised Iron wires (Of all sizes) for fencing cost including all material, binding wire and labour charges etc. complete as per Standard specification and as directed by the departmental officers

Barbed Wire - 10 Gauge - Two Ply and Four Pronged(Galvanised)

Labour for tying barbed wire fencing vertically withrequired tension

KERB WALL Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

LIGHTING ARRANGEMENTS supply and Fixing of 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 4000mm Length etc complete

Supply of 25W LED Street Light Fitting with LED etc complete

Earthing as per PWD standard specification with on earth electrode of 2m class 'B' pipe of dia not less than 32mm complete. Brass cable event for suitable armoured LTUG cable with earth connection suitable of 4 X 16sqmm etc complete

Supply and laying of 4x 10Sqmm sizes of Armoured Aluminium Cables for electrical motor, control panel,pressure switch, jockey motor etc.. The rate inclusiveof all incidental charges, neccessary scaffolding and redoing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON /FINOLEX / EQUIVALENT.

Supply and erection of 3 Core 1.5 sq.mm. PVC Power Cable for Projector including cost and coveyance of all materials to site and labour charges etc complete..

Supply and fixing of single (MCB ) higher MINIATURE CIRCUIT BREAKERS 240 V / 415V 50HZ - AC SUPPLY SUITABLE FOR BOTH LIGHTING AND MOTOR CIRCUITS including cost and coveyance of all materials to site and labour charges etc complete..

SEATING AND DUST BIN ARRANGEMENTS Supply, Delivery and Providing Three Seater back slope Granite stiff sitting benches 5 feet in length 1.50 feet width 600x450x100 mm size Hard Granite slab side walls, 150x45x100 mm size bench slab back slope slab including cost and conveyance and fixing

Supplying and fixing of Dustbin arrangements as per required specifications.

BATHING GHAT Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c) and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. Centering for Plinth beam

INLET AND OUTLET Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c) and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc. Centering for raft and side wall

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.