Municipal Administration And Water Supply Department Tender

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supply and Delivery of 1000 ltr HDPE Tank as per IS 12701/1996 including laoding unloading , Transportation and labour charges for fixing of the GI pipes and Specials for pipe connection works including cutting, threading and fixing charges etc

Geological suevey for new bore well point.

Supply and run of 2×4 sq mm (56/0.3) PVC insulated Single core unsheathed Copper conductor cable of 1100V grade in 25mm dia GI pipe (class B) suitably bent at both ends with necessary angleovor upright and end supports for main.(SD-70)

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1"x1/8"copper flat) on TW plank of size 375mmx300mmx19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40Amp 30MA Double Pole RCD / RCCB (Lower End) with suitable necessary connection -SD 126

Wiring with 2×1.5 sq mm (22/0.3) PVC insulated SC unshethed on conductor of 1100V grade in suitable PVC rigid pipe on wall and ceily with PVC accessaries and with TW suitable box and 5A F.T switc with painting of suitable glam for open PVC light point / fan point. (SD-20)

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb-SD 84

Drilling to borewells of size 4" to 5'' dia in sedimentary formation using hand boresets including insertation of casing pipes and removal of casing pipes etc., including supplying and packing of pebbles and conveyance of hand boresets including loading and unloading etc., complete

Supplying and Delivery of 150mm dia PVC casing pipe as per IS1 2818/2010 including cost Materials and Transportation etc complete (CM)

Supply and deliver of single phase compressure motor with ISI marking as per specification for the duty condition with suitable for installation in 110mm dia borewell etc complete (1.50HP× m duty condition)

Supply of 1.50Hp compressure motor's starter including cost conveyance to site etc complete.

Labour Charges for erection of Horizontal shaft, centrifigal pumpset (Coupled/Monoblock) in borewell/ Openwell including fixing of suction pipe and foot valve upto a maximum depth of 7 metres and delivery pipes to the required length with valves, pressure guages up to the exterior wall of pump room and erection of panel Board consisting of TPIC switches starter, Voltmeter, Ammeter, Capacitor single phasing preventor and laying and jointing the cables and twin earthing as per IE rules including providing bed blocks etc., Complete and operating the pumps and trail run for 10 days including signing of completeion of reports as required by EB Authorities (Up to 3 HP)

Supply of 1" HDPE Hose

Supply of 1/2" HDPE Hose

Supply of 1/2" GI Pipe

Supply of 1" CPVC Pipe

Supply of 1"x1/2" Bore Coupling

Supply of Bore Bottom Valve

Supply of 20mm PVC Tap