Municipal Administration And Water Supply Department Tender

Cantering for soffits of reinforced cement concrete slabs, plans surfaces Including strutting 3m height using M.S. plate of size 90cmx60cm and 10 gauge stiffened with welded mild steel angles of size 25x25x3mm laid over silver oak (Country wood ) joists of size 10cmx6.5xcm, spaced at about 90cm c/c. and supported by casurina props of 10cm c/c comp. /ing with std. specification for grade beam

for Column

for Roof Beam And Slab

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials) up to basement

In G.F floor

Supplying fabricating and placing the grills in position of M.S (or) RTS rods reinforcement grill for all RCC works Including cost of steel rods and binding wire (The M.S. or RTS rods along with the binding wire shall be contrators own cost.)

Brickwork in cement mortar 1:5 (one cement and five sand) using 3nd class table country brick kiln burnt of size 83/4"x41/4"x23/4" including curing, cost and conveyance of all materials to site and all labour charges etc. complete as per standard specification up to basement

In GF

plastering with cement mortar 1:5 (one cement and five sand 12mm thick including curing etc, complete

Special plastering In cement mortar 1:3 (one cement and three sand) 10mm. thick for all exposed faces of RCC works including hacking, curing, etc., complete, complying with std specification.

Supplying and fixing of MS grills for doors, windows and ventilators as directed by departmental officers including cost of MS grills, red oxide primer one coat and all labour charges etc. Eomplete as per standard specification

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured ceme

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Weathering course using concrete broken brick Jelly 20mm gauge in pure slacked line over RCC roof slab In proportion of 32:12 1/2 well beaten by wooden beater for giving required slope etc. complete

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm of approved quality laid In cement mortar 1:3 (one cement, three sand) mixed with water proof compound at 2% by weight of cement used and pointed with the same mortar etc. complete

Wiring with 2x1.5sqmm(22/0.30) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113 mm TW switch boxfor 5 A 3 pin non inter locking wall socket with 5A Flush type witch with painting of suitable colour with continuous earth wire connection of 14 SWG Tc wire for open PVc plug point SD36

Wiring with 2x1.5sqmm(22/0.30) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box and 5A f.T switch with painting of suitable colour for open PVC light point /fan (For electronic regulator) (6points per coil) SD20

18 W LED Tubelight for T8 Fitting Single side (15- e) SD p-174

Supplying and fixing 12" (30cm dia) light duty Exhaust fan including cost of all materials,labour, lead, lift, etc complete PWD-21-22 Page-118