Municipal Administration And Water Supply Department Tender

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site, labour charges for mixing, laying, compacting and curing concrete etc., complete

Supplying and filling with well Gravel in layers not more than 15 cm thick including labour charges for Filling, Levelling, watering, well rammed and compacted etc., complete.

Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation and basement including labour and all other incidental charges etc., complete

Supplying and erection Centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab, Lintel, Beam, Column, Sunshade including cost and coveyance of all materials to site and all other incidental charges etc complete.,

Column

Grade beam

Slab & Beam

Reinforced Cement Concrete 1:1.5:3 using 20mm ISS HBG metal including cost and conveyance of all maerials to site and all labour charges for mixing concrete, placing, ramming, vibrating with mechanical vibrator, consolidation and Curing etc., complete as directed by departmental officers.

Supplying and fabrication of Steel of required for all RCC item of works involved including fabrication and labour charges for Cutting, bending, tying, placing in position, includes overlaping length wherever required etc., complete

Brick work with cement mortar 1:5 mix using Country bricks for Foundation, Basement and Superstructure inculding cost and conveyance of all materials to site, labour charges for curing and other incidental charges etc ,complete.

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Dadooing walls with Printed Design Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. The Glazed tiles should be got approved from the Departmental officers before execution.

Plastering with Cement Morter 1:5 mix, 12mm thick Smooth finish for Brick, RR masonry surface and other Concrete surfaces inculding cost and conveyance of all materials to site and all other labour charges, incidental charges etc., complete

Plastering with Cement Morter 1:3 mix, 10mm thick Smooth finish for Brick, RR masonry surface and other Concrete surfaces inculding cost and conveyance of all materials to site and all other labour charges, incidental charges etc., complete

Finishing the top of roof with one course of PRESSED TILES of size 20 cm X 20 cm X 2 cm laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S by 2% weight of cement used and the joint pointed neatly to full depth of tiles with same mortar mixed with water proofing compoud etc., complete

Supplying & fixing Water Closet, Wash Basin (Indian Made and Western) of Standard approved Quality including all Sanitary fixtures, P or S Trap, Flushing Tank and all other incidental charges etc., complete

Indian Water Closet

Wash Basin

Supplying & fixing with Cuddapah slabs 20-30mm thick for Cub boards & Shelfs at required location and pointed with cement mortar 1:3 including all incidental charges etc., complete

Fabrication and supply of Mild Steel Door, Window and Rolling Shutters Ventilator any size with single leaf outer frame made o M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Supplying and fixing of rolling shutters shall be pull and push type (Gear operated) made of 18G/3" lathe sections which consist of five main parts such as curtain, lock plate, guide channels rollers and hood cover. These five main parts are made out of special components detailed below: curtain shall be of 18G/3" lath sections cut to required size and filled with heavy cast iron / MS clips. For 8'0"(2.45m) high rolling shutter lath sections provided shall be not less than 37 numbers. Lock plate shall be 10GMS sheet and attached to the side brackets with 20mm square bar.Side brackets shall be of 10G MS plate and cast iron "U" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty "C" class 40mm steel pipe and high tensile high carbon coil springs. 2 springs shall be supplied. Side brackets shall be of 10G MS plate and cast iron "U" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty "C" class 40mm steel pipe and high tensile high arbon coil springs - 2 springs shall be supplied. Hood cover shall be of 0.8mm CRCA sheet reinforced with 25mmx25mmx3mm MS angle or gate channel. The rolling shutter in addition to the above should have pulling hook and shall be coated on exposed area with heavy coat of red oxide primer etc., complete.

Distembering two coats Oil Bound Distember over priming coat inculding cost and conveyance of all materials to site and all labour charges for preparing the surface, scrapping, attaining smooth finish etc., complete

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting two coats over New Iron work such as doors, windows, ventilators, windows bars, balustrades etc., with best approved best quality of synthetic enamal paint of approved colour over the existing priming coat etc., complete.

Electrical Arrangements

Wiring with 2 X 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / Fan point (For electronic Regulator) SD 20

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick Hylum sheet cover for 5 Amp pin Non interlocking CS plug with continous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for Concealed PVC Plug point SD 36

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for Service Connection Mains SD 64

Supply and run of 2x1.50 sq.mm (22/0.30) PVC insulated SC unsheathed Copper Conductor of 1100 V grade in 25mm dia GI Pipe (Class B) suitably bent at both ends with necessary angle iron upright and end supports for Mains SD 69

Supply and fixing of Single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. SD 88

Supply and fixing of WT bulk head fitting For 15W with LED Bulb with guard (Philips / Bajaj / Crompton / K. Lite) suitable for incandescent lamp with 60 W bulb - SD 83 etc., complete

Supply and fixing of 1200 mm ( 48") AC Ceiling Fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit - SD 125.

Water Supply and Sanitary Disposal Arrangements

Earthwork excavation in all classes of Soils and Subsoils except hard rock requiring blasting for laying of Pipes with the standard trench width as per Standard specifications - TWAD board specifications from Source to Storage tank

Supply and Delivery of GI/PVC Pipes and specials (as per BIS standards) for Water supply conveying from Source to Storage tank including material, labour and all other incidental charges etc., complete

32mm dia 6 Kgsc Pipe - Supply

HDPE - PVC Tank 1000 Litres

Refilling of Excavated earth after testing including all cost and labour charges etc, complete

Providing Paver Block Pavement

Earth work excavation in hard stiff clay soil with initial lead and lift as per SS 20B for foundation as per SL. No.148

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Supplying and erecting centering shuttering including necessary supports for plane surface in foundation and basement and in all floors for R C C column footing including conveyance of all materials to site and proper centering etc complete.

Cement concrete 1:3:6 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,aying and curing etc complete for 10 cum

Supplying and filling with well Gravel in layers not more than 15 cm thick including labour charges for Filling, Levelling, watering, well rammed and compacted etc., complete.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 50mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.